Welcome to Geeklog, Anonymous Sunday, December 01 2024 @ 02:44 pm EST
Geeklog Forums
more installation problems
Page navigation
New to php
Anonymous
I have just ftp'd geeklog to public_html folder (which is named with domain), and ftp'd the reminder one step above this to html/
On step 1 of installation all appears correct - when I go to step 2 I get the following error !!!
On step 1 of installation all appears correct - when I go to step 2 I get the following error !!!
Warning: main(html/idhsgb.com/system/databases/mysql.class.php) [function.main]: failed to open stream: No such file or directory in /home/users/uks59246/html/system/lib-database.php on line 117
Fatal error: main() [function.require]: Failed opening required 'html/idhsgb.com/system/databases/mysql.class.php' (include_path='.:/usr/share/php:/usr/share/pear' in /home/users/uks59246/html/system/lib-database.php on line 117
Fatal error: main() [function.require]: Failed opening required 'html/idhsgb.com/system/databases/mysql.class.php' (include_path='.:/usr/share/php:/usr/share/pear' in /home/users/uks59246/html/system/lib-database.php on line 117
36
36
Quote
New to php
Anonymous
Thanks Dirk, I'm now getting
Parse error: syntax error, unexpected ':', expecting ']' in /home/users/uks59246/html/config.php on line 89
39
32
Quote
Status: offline
Dirk
Site Admin
Admin
Registered: 01/12/02
Posts: 13073
Location:Stuttgart, Germany
New to php
Anonymous
:helpme: Dirk, sorry to be a pain here............but just cannot figure this out !!! his is the error
and this what I've got -
Parse error: syntax error, unexpected ':', expecting ']' in /home/users/uks59246/html/config.php on line 89
and this what I've got -
// Some hosting services have a preconfigured admin directory. In that case,
// you need to rename Geeklog's admin directory to something like "myadmin"
// and change the following URL as well. Leave as is until you experience any
// problems accessing Geeklog's admin menu.
$_CONF['site_admin_url'] = $_CONF[http://www.idhsgb.com/admin/'] . 'admin/';
// you need to rename Geeklog's admin directory to something like "myadmin"
// and change the following URL as well. Leave as is until you experience any
// problems accessing Geeklog's admin menu.
$_CONF['site_admin_url'] = $_CONF[http://www.idhsgb.com/admin/'] . 'admin/';
35
38
Quote
Status: offline
Dirk
Site Admin
Admin
Registered: 01/12/02
Posts: 13073
Location:Stuttgart, Germany
Quote by: New to php
$_CONF['site_admin_url'] = $_CONF[http://www.idhsgb.com/admin/'] . 'admin/';
Apart from it being syntactically wrong (hence the error) - you don't need to change that line at all. Please revert it to its original state which was
Text Formatted Code
$_CONF['site_admin_url'] = $_CONF['site_url'] . '/admin';bye, Dirk
38
50
Quote
New to php
Anonymous
Your patience and help is very much appreciated - I apologise for being such a dummy with php, but trying to get to grips with it. This what I'm seeing now (which is where I started this thread !!!!)
Looking at config.php from line 114 I see this, but cannot grasp the relevance to this error???
I've tried changing these to absolute paths - /home/users/uks59246/html/ - but theerror remains the same, so have reverted it ????????? :banghead: :banghead:
Warning: main(html/idhsgb.com/system/databases/mysql.class.php) [function.main]: failed to open stream: No such file or directory in /home/users/uks59246/html/system/lib-database.php on line 117
Fatal error: main() [function.require]: Failed opening required 'html/idhsgb.com/system/databases/mysql.class.php' (include_path='.:/usr/share/php:/usr/share/pear' in /home/users/uks59246/html/system/lib-database.php on line 117
Fatal error: main() [function.require]: Failed opening required 'html/idhsgb.com/system/databases/mysql.class.php' (include_path='.:/usr/share/php:/usr/share/pear' in /home/users/uks59246/html/system/lib-database.php on line 117
Looking at config.php from line 114 I see this, but cannot grasp the relevance to this error???
// you shouldn't need to edit theses
$_CONF['path_system'] = $_CONF['path'] . 'system/';
$_CONF['path_log'] = $_CONF['path'] . 'logs/';
$_CONF['path_language'] = $_CONF['path'] . 'language/';
$_CONF['backup_path'] = $_CONF['path'] . 'backups/';
$_CONF['path_data'] = $_CONF['path'] . 'data/';
$_CONF['path_system'] = $_CONF['path'] . 'system/';
$_CONF['path_log'] = $_CONF['path'] . 'logs/';
$_CONF['path_language'] = $_CONF['path'] . 'language/';
$_CONF['backup_path'] = $_CONF['path'] . 'backups/';
$_CONF['path_data'] = $_CONF['path'] . 'data/';
I've tried changing these to absolute paths - /home/users/uks59246/html/ - but theerror remains the same, so have reverted it ????????? :banghead: :banghead:
34
37
Quote
Status: offline
jmucchiello
Forum User
Full Member
Registered: 08/29/05
Posts: 985
Looks like $_CONF['path'] is still wrong. It should be (based on the error message)
If that's what you have, check the system/databases/ directory and make sure the mysql.class.php file is there.
Please post your $_CONF['path'] and $_CONF['path_html'] if you are still having trouble.
Text Formatted Code
$_CONF['path'] = '/home/users/uks59246/html/'Please post your $_CONF['path'] and $_CONF['path_html'] if you are still having trouble.
44
34
Quote
dat
Anonymous
Why don't you show us what $_CONF['path'] is?
35
28
Quote
New to php
Anonymous
Got the mysql.class.php file in the correct place - I think ??
Here's my config.php file in totality
<?php
/* Reminder: always indent with 4 spaces (no tabs). */
// +---------------------------------------------------------------------------+
// | Geeklog 1.4 |
// +---------------------------------------------------------------------------+
// | config.php |
// | |
// | Geeklog configuration file. |
// +---------------------------------------------------------------------------+
// | Copyright (C) 2001-2006 by the following authors: |
// | |
// | Authors: Tony Bibbs - tony AT tonybibbs DOT com |
// | Dirk Haun - dirk AT haun-online DOT de |
// +---------------------------------------------------------------------------+
// | |
// | This program is free software; you can redistribute it and/or |
// | modify it under the terms of the GNU General Public License |
// | as published by the Free Software Foundation; either version 2 |
// | of the License, or (at your option) any later version. |
// | |
// | This program is distributed in the hope that it will be useful, |
// | but WITHOUT ANY WARRANTY; without even the implied warranty of |
// | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
// | GNU General Public License for more details. |
// | |
// | You should have received a copy of the GNU General Public License |
// | along with this program; if not, write to the Free Software Foundation, |
// | Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
// | |
// +---------------------------------------------------------------------------+
// | See the docs/install.html and docs/config.html files for more information |
// | on configuration. |
// +---------------------------------------------------------------------------+
//
// $Id: config.php,v 1.240 2006/12/30 17:43:18 dhaun Exp $
// When setting up Geeklog for the first time, you need to make sure the
// settings in the following 3 sections are correct:
// (1) Database Settings
// (2) Paths
// (3) Site Settings
// You can adjust the other settings once your site is up and running.
// +---------------------------------------------------------------------------+
// | (1) Database Settings |
// +---------------------------------------------------------------------------+
$_DB_host = 'localhost'; // host name or IP address of your DB server
$_DB_name = 'geeklog'; // name of your database,
// must exist before running the installer!
$_DB_user = 'username'; // MySQL user name
$_DB_pass = 'password'; // MySQL password
// The table prefix is prepended to each table used by Geeklog to avoid name
// collisions with other tables that may already exist in your database.
$_DB_table_prefix = 'gl_'; // e.g. 'gl_'
// +---------------------------------------------------------------------------+
// | (2) Paths |
// +---------------------------------------------------------------------------+
// Note for Windows users: It's safe to use the forward slash '/' instead of
// the backslash '\' in paths. Make sure each path starts with a drive letter!
// This should point to the directory where your config.php file resides.
$_CONF['path'] = 'home/users/uks59246/html/'; // should end in a slash
// You only need to change this if you moved or renamed the public_html
// directory. In that case, you should specify the complete path to the
// directory (i.e. without the $_CONF['path']) like this:
// $_CONF['path_html'] = '/home/users/uks59246/html/idhsgb.com/';
$_CONF['path_html'] = $_CONF['path'] . 'idhsgb.com/';
// +---------------------------------------------------------------------------+
// | (3) Site Settings |
// +---------------------------------------------------------------------------+
// Make sure this is the correct URL to your site, i.e. to where Geeklog's
// index.php file resides (no trailing slash).
$_CONF['site_url'] = 'http://www.idhsgb.com';
// Some hosting services have a preconfigured admin directory. In that case,
// you need to rename Geeklog's admin directory to something like "myadmin"
// and change the following URL as well. Leave as is until you experience any
// problems accessing Geeklog's admin menu.
$_CONF['site_admin_url'] = $_CONF['site_url'] . '/admin';
// This is the return address for all email sent by Geeklog and contact info
// displayed in syndication feeds:
$_CONF['site_mail'] = 'admin@idhsgb.com';
// Name and slogan of your site
$_CONF['site_name'] = 'IDHS(GB)';
$_CONF['site_slogan'] = 'Irish Draught Horse Society (GB)';
// ****************************************************************************
// * If you set up Geeklog for the first time, you shouldn't need to change *
// * anything below this line. Come back here once the site is up and running.*
// ****************************************************************************
// Note: See the file docs/config.html for more information on the settings.
// +---------------------------------------------------------------------------+
// | OTHER PATH SETTINGS |
// | |
// | All paths must have a trailing slash ('/'). |
// +---------------------------------------------------------------------------+
// you shouldn't need to edit theses
$_CONF['path_system'] = $_CONF['path'] . 'system/';
$_CONF['path_log'] = $_CONF['path'] . 'logs/';
$_CONF['path_language'] = $_CONF['path'] . 'language/';
$_CONF['backup_path'] = $_CONF['path'] . 'backups/';
$_CONF['path_data'] = $_CONF['path'] . 'data/';
// If you set path_images to something other than the default, you will need to
// make sure that you add the following subdirectories to that directory:
// articles/, userphotos/
$_CONF['path_images'] = $_CONF['path_html'] . 'images/';
// +---------------------------------------------------------------------------+
// | PEAR Settings |
// | |
// | Geeklog uses PEAR to send emails (see "Email Settings" below). Here you |
// | can tell Geeklog whether to use the PEAR packages installed on your |
// | server or to use the included packages. |
// +---------------------------------------------------------------------------+
// If your server is running PHP 4.3.0 (or newer) then chances are that PEAR
// is already installed and you can change this to: $_CONF['have_pear'] = true;
$_CONF['have_pear'] = false;
// Geeklog comes with the necessary PEAR packages and will pick them up from
// the following directory if $_CONF['have_pear'] = false (above).
$_CONF['path_pear'] = $_CONF['path_system'] . 'pear/';
// +---------------------------------------------------------------------------+
// | Email Settings |
// | |
// | Configure how Geeklog sends email: Via PHP's mail() function, sendmail, |
// | or via an SMTP server. |
// +---------------------------------------------------------------------------+
// To send email from Geeklog, you will need to select one of the following
// email backends:
// - 'mail', i.e. use PHP's built-in mail() function
// - 'sendmail', i.e. use the sendmail utility
// - 'smtp', i.e. talk directly to your SMTP server
// The default is 'mail' and will work in most environments.
$_CONF['mail_settings'] = array (
'backend' => 'mail', // can be one of 'mail', 'sendmail', 'smtp'
// sendmail parameters (only needed for 'backend' => 'sendmail')
'sendmail_path' => '/usr/bin/sendmail',
'sendmail_args' => '',
// SMTP parameters (only needed for 'backend' => 'smtp')
'host' => 'smtp.example.com',
'port' => '25',
'auth' => false,
'username' => 'smtp-username',
'password' => 'smtp-password'
);
// +---------------------------------------------------------------------------+
// | OTHER DATABASE SETTINGS |
// | |
// | Database type and database backup settings. |
// +---------------------------------------------------------------------------+
$_DB_dbms = 'mysql'; // can be either 'mysql' or 'mssql' (Microsoft SQL Server)
// the following options are for MySQL only
// optional settings for making database backups from within Geeklog
$_CONF['allow_mysqldump'] = 1; // 1 = on, 0 = off
// full path of the mysqldump executable (Windows users: add ".exe"!)
$_DB_mysqldump_path = '/usr/bin/mysqldump';
// additional options for mysqldump
// If you're using InnoDB tables, include '--single-transaction' or you
// may end up with inconsistent backups!
$_CONF['mysqldump_options'] = '-Q';
// +---------------------------------------------------------------------------+
// | SITE SETTINGS |
// | |
// | These settings help define your Geeklog site. |
// +---------------------------------------------------------------------------+
$_CONF['theme'] = 'professional'; // default theme
// List of entries that you want to see in the site's menu bar (if you're using
// a theme that uses the {menu_elements} variable in its header.thtml).
// Choose any combination of the following (order here = order in the menu).
$_CONF['menu_elements'] = array
(
// 'home', // link to homepage
'contribute', // contribute / "submit a story" link
'search', // link to advanced search
'stats', // link to site stats
'directory', // link to list of past stories
// 'prefs', // link to user's preferences
'plugins' // links added by plugins, like {plg_menu_elements}
// 'custom' // for custom links (see lib-custom.php)
);
// you shouldn't need to edit the following
$_CONF['layout_url'] = $_CONF['site_url'] . '/layout/' . $_CONF['theme'];
$_CONF['path_themes'] = $_CONF['path_html'] . 'layout/';
$_CONF['path_layout'] = $_CONF['path_themes'] . $_CONF['theme'] . '/';
// stops new registrations if set to true.
$_CONF['disable_new_user_registration'] = false; // set to true to block users.
// optional settings (1 = on, 0 = off)
$_CONF['allow_user_themes'] = 1;
$_CONF['allow_user_language'] = 1;
$_CONF['allow_user_photo'] = 1; // allow users to upload self-photo
// Allow users to change their username (if set to 1).
$_CONF['allow_username_change'] = 0;
// Allow users to delete their account (if set to 1).
$_CONF['allow_account_delete'] = 0;
// hides the list of authors from the preferences
$_CONF['hide_author_exclusion'] = 0;
// Used by COM_getDisplayName to return Members's Full Name else username
$_CONF['show_fullname'] = 0; // 1 = show user's full name
// Used by COM_getDisplayName to return users remote login service, if they have one.
$_CONF['show_servicename'] = true; // Set to false to not show it.
// +---------------------------------------------------------------------------+
// | Support for custom user registration form and account details |
// | Requires custom functions to be written that can be placed in lib-custom |
// | Function hooks are in users.php, usersettings.php and admin/user.php |
// +---------------------------------------------------------------------------+
$_CONF['custom_registration'] = false; // Set to true if you have custom code
// +---------------------------------------------------------------------------+
// | Support for remote authentication of users, i.e. logging in via other |
// | supported remote servers. Requires custom classes in: |
// | system/classes/authentication/ |
// +---------------------------------------------------------------------------+
$_CONF['remoteauthentication'] = false; // Set to true to enable remote logins.
// +---------------------------------------------------------------------------+
// | Define action to be taken by Spam-X module if spam detected |
// | Current Spam-X module supports two actions which can be combined |
// | Additional classes can be added as well as other plugin extensions |
// | Actions: 128 = ignore comment and redirect to homepage |
// | 8 = mail admin message |
// | 136 (SUM) ignore and email admin |
// +---------------------------------------------------------------------------+
$_CONF['spamx'] = 128; // Default to ignore comment.
// +---------------------------------------------------------------------------+
// | Sort the links in the admin block and the admin panel. |
// +---------------------------------------------------------------------------+
$_CONF['sort_admin'] = true;
// +---------------------------------------------------------------------------+
// | Path to user files relative to the $_CONF['site_url'] (no trailing slash) |
// | Relative Directory where the Editor Image Library store |
// +---------------------------------------------------------------------------+
$_CONF_FCK['imagelibrary'] = '/images/library';
// +---------------------------------------------------------------------------+
// | LOCALE SETTINGS |
// | |
// | see docs/config.html#locale for details |
// +---------------------------------------------------------------------------+
$_CONF['language'] = 'english';
$_CONF['default_charset'] = 'iso-8859-1';
// Note: You may want to consider using 'utf-8' as the default character set
// for new sites, especially when using the multi-language support (see below).
// Make sure to use a matching language file, e.g. 'english_utf-8' then.
$_CONF['locale'] = 'en_GB';
$_CONF['date'] = '%A, %B %d %Y @ %I:%M %p %Z';
$_CONF['daytime'] = '%m/%d %I:%M%p';
$_CONF['shortdate'] = '%x';
$_CONF['dateonly'] = '%d-%b';
$_CONF['timeonly'] = '%I:%M%p';
$_CONF['week_start'] = 'Sun'; // can be 'Sun' or 'Mon'
$_CONF['hour_mode'] = 24; // 12 hour am/pm or 24 hour format
// Number formatting
$_CONF['thousand_separator'] = ","; // could be ' , . etc.
$_CONF['decimal_separator'] = "."; // could be , . etc.
$_CONF['decimal_count'] = "2"; // if a number has decimals,
// force to this depth
// Multi-language support
// (note that this section is commented out - remove the '/*' and '*/' lines
// below to activate it and make sure you understand what it does)
/*
// IMPORTANT!
// 1) Both the $_CONF['language_files'] and the $_CONF['languages'] arrays
// (see below) must have the same number of elements.
// 2) The shortcuts used must be the same in both arrays.
// 3) All shortcuts must have the same length, e.g. 2 characters.
// The shortcuts are to be used in IDs of objects that are multi-language
// aware, e.g. /article.php/introduction_en and /article.php/introduction_de
// for the English and German version of an introductory article.
// Supported languages
// Maps a shortcut to a Geeklog language file (without the '.php' extension)
$_CONF['language_files'] = array (
'en' => 'english_utf-8',
'de' => 'german_formal_utf-8'
);
// Display names of supported languages
// Maps the same shortcuts as above to a language name. The language names
// are used to let users switch languages, e.g. in a drop-down menu.
$_CONF['languages'] = array (
'en' => 'English',
'de' => 'Deutsch'
);
*/
// "Timezone Hack"
// If your webserver is located in a different timezone than yourself but you
// prefer Geeklog to post stories in your local time, then set your local
// timezone here.
//
// Please note that this does not work when safe_mode is on!
//
// For more information, see this discussion on geeklog.net:
// http://www.geeklog.net/forum/viewtopic.php?showtopic=21232
// $_CONF['timezone'] = 'Etc/GMT-6'; // e.g. 6 hours behind GMT
// +---------------------------------------------------------------------------+
// | SITE STATUS |
// | |
// | To disable your Geeklog site quickly, simply set this flag to false |
// +---------------------------------------------------------------------------+
$_CONF['site_enabled'] = true; // true or false
// Message shown when site is down
// When this starts with 'http:' visitors are redirected to that URL
$_CONF['site_disabled_msg'] = 'Geeklog Site is down. Please come back soon.';
// When set to true, this will display /detailed/ debug information in the event
// of a PHP error. ONLY set this to true with your non-production development
// environments!
$_CONF['rootdebug'] = false;
// +---------------------------------------------------------------------------+
// | SESSION SETTINGS |
// | |
// | cookie_ip will store md5(remoteip + randomnum) as the session ID in the |
// | cookie. This is more secure but will more than likely require dialed up |
// | users to login each and every time. If ipbasedsessid is turned off |
// | (which it is by default) it will just store a random number as the |
// | session ID in the cookie. |
// | |
// | default_perm_cookie_timeout is how long you want the permanent cookie |
// | to persist for (in seconds). This can be overridden by the user in |
// | their user prefs if they want. If you set the default to 0, users will |
// | have to log in again once their session expired. |
// | |
// | session_cookie_time is how long you want the session cookie to persist |
// | for. Only really useful in scenarios where you don't want to allow |
// | permanent cookies |
// +---------------------------------------------------------------------------+
$_CONF['cookie_session'] = 'gl_session';
$_CONF['cookie_name'] = 'geeklog';
$_CONF['cookie_password'] = 'password';
$_CONF['cookie_theme'] = 'theme';
$_CONF['cookie_language'] = 'language';
$_CONF['cookie_ip'] = 0;
$_CONF['default_perm_cookie_timeout'] = 28800;
$_CONF['session_cookie_timeout'] = 7200;
$_CONF['cookie_path'] = '/';
$_CONF['cookiedomain'] = ''; // e.g. '.example.com'
$_CONF['cookiesecure'] = 0;
// Geeklog keeps track of when a user last logged in. Set this to false
// if you don't want that.
$_CONF['lastlogin'] = true;
// +---------------------------------------------------------------------------+
// | This is really redundant but I am including this as a reminder that those |
// | people writing Geeklog Plugins that are OS dependent should check either |
// | the $_CONF variable below or PHP_OS directly. If you are writing an |
// | addon that is OS specific your addon should check the system is using the |
// | right OS. If not, be sure to show a friendly message that says their GL |
// | distro isn't running the right OS. Do not modify this value |
// +---------------------------------------------------------------------------+
$_CONF['ostype'] = PHP_OS;
// Note: PDF conversion didn't make it into this release. Leave as is.
$_CONF['pdf_enabled'] = 0;
// +---------------------------------------------------------------------------+
// | SEARCH SETTINGS |
// +---------------------------------------------------------------------------+
// default number of search results (per type) to be displayed per page
$_CONF['num_search_results'] = 10;
// +---------------------------------------------------------------------------+
// | MISCELLANEOUS SETTINGS |
// | |
// | These are other various Geeklog settings. The defaults should work OK |
// | for most situations. |
// +---------------------------------------------------------------------------+
// this lets you select which functions are available for registered users only
$_CONF['loginrequired'] = 0; // all of them, if set to 1 will override all else
$_CONF['submitloginrequired'] = 0;
$_CONF['commentsloginrequired'] = 0;
$_CONF['statsloginrequired'] = 0;
$_CONF['searchloginrequired'] = 0;
$_CONF['profileloginrequired'] = 0;
$_CONF['emailuserloginrequired'] = 0;
$_CONF['emailstoryloginrequired'] = 0;
$_CONF['directoryloginrequired'] = 0;
// Submission Settings
// enable (set to 1) or disable (set to 0) submission queues:
$_CONF['storysubmission'] = 1;
$_CONF['usersubmission'] = 0; // 1 = new users must be approved
// When set to 1, this will display an additional block on the submissions page
// that lists all stories that have the 'draft' flag set.
$_CONF['listdraftstories'] = 0;
// Send an email notification when a new submission has been made. The contents
// of the array can be any combination of 'story', 'comment', 'trackback',
// 'pingback', and 'user'.
// Example: $_CONF['notification'] = array ('story', 'comment');
// The email will be sent to $_CONF['site_mail'] (see above).
$_CONF['notification'] = array ();
$_CONF['postmode'] = 'plaintext'; // can be 'plaintext' or 'html'
$_CONF['speedlimit'] = 45; // in seconds
$_CONF['skip_preview'] = 0; // If = 1, allow user to submit comments and stories without previewing
// +---------------------------------------------------------------------------+
// | Support for custom templates to support advanced Rich Text Editor |
// | Checked in comment.php, submit.php, admin/story.php and |
// | staticpages/index.php. If set true and advanced template exists |
// | Note: If enabled, the default postmode will be html |
// +---------------------------------------------------------------------------+
$_CONF['advanced_editor'] = false;
// +---------------------------------------------------------------------------+
// | Internal Geeklog CRON or scheduled Task/Function setting |
// | Plugins can use the runScheduledTask API to activate any automated tasks |
// | or add code in lib-custom to the CUSTOM_runScheduledTask function |
// +---------------------------------------------------------------------------+
$_CONF['cron_schedule_interval'] = 86400; // Seconds - Default 1 day
// Topic Settings
// Topics can be assigned a sort number so that you can control what order they
// appear in the 'Topics' block on the homepage. If you prefer you can also
// have this sort alphabetically by changing the value to 'alpha' (default is
// by 'sortnum'
$_CONF['sortmethod'] = 'sortnum'; // or 'alpha'
// Show the number of stories in a topic in Topics Block
$_CONF['showstorycount'] = 1;
// Show the number of story submissions for a topic in Topics Block
$_CONF['showsubmissioncount'] = 1;
// Hide 'Home' link from Topics block (if set to 1)
$_CONF['hide_home_link'] = 0;
// Who's Online block settings
// How long an anonymous (guest) user session is good for
$_CONF['whosonline_threshold'] = 300; // in seconds
// If set to 1, don't show names of registered users to anonymous users
$_CONF['whosonline_anonymous'] = 0; // 1 = don't show names to anon. users
// "Daily Digest" settings
// Let users get stories emailed to them
// Requires cron and the use of php as a shell script
$_CONF['emailstories'] = 0;
// Specify length of stories in those emails:
// 0 = send only title + link, 1 = send entire introtext,
// any other number = max. number of characters per story
$_CONF['emailstorieslength'] = 1;
// New users get stories emailed to them per default (= 1) or not (= 0)
$_CONF['emailstoriesperdefault'] = 0;
// When user submission is activated, allow users from these domains to
// register without having to go through the submission queue.
$_CONF['allow_domains'] = ''; // e.g. 'mycompany.com,myothercompany.com'
// Comma-separated list of domain names that are not allowed for new user
// signups (for all new registrations - not only for the user submission queue)
$_CONF['disallow_domains'] = ''; // e.g. 'somebaddomain.com,anotherbadone.com'
// Following times are in seconds
$_CONF['newstoriesinterval'] = 86400; // = 24 hours
$_CONF['newcommentsinterval'] = 172800; // = 48 hours
$_CONF['newtrackbackinterval'] = 172800; // = 48 hours
// Set to 1 to hide a section from the What's New block:
$_CONF['hidenewstories'] = 0;
$_CONF['hidenewcomments'] = 0;
$_CONF['hidenewtrackbacks'] = 0;
$_CONF['hidenewplugins'] = 0;
// max. length of titles to be displayed in the What's New block
$_CONF['title_trim_length'] = 20;
// Disable trackback comments by setting this to 'false'
$_CONF['trackback_enabled'] = true;
// Disable pingbacks by setting this to 'false'
$_CONF['pingback_enabled'] = true;
// Disable pinging weblog directory services by setting this to 'false'.
$_CONF['ping_enabled'] = true;
// Allow / disallow trackbacks and pingbacks to stories by default
// (can be changed individually for every story)
$_CONF['trackback_code'] = 0; // 0 = trackbacks enabled, -1 = disabled
// how to handle multiple trackbacks and pingbacks from the same URL:
// 0 = reject, 1 = only keep the latest, 2 = allow multiple posts
$_CONF['multiple_trackbacks'] = 0;
// min. time between trackbacks or pingbacks, in seconds
$_CONF['trackbackspeedlimit'] = 300;
// Use this option to check the validity of Trackbacks:
// 0 = don't check anything,
// 1 = check against $_CONF['site_url'], 2 = check full URL
// 4 = check IP address of sender against the site's IP in the Trackback
// add the values to do more than one check, e.g. 2 + 4 = 6, i.e. check URL + IP
$_CONF['check_trackback_link'] = 2;
// how to handle pingbacks from one article on our site to another:
// 0 = skip, 1 = allow, with speed limit, 2 = allow, without speed limit
$_CONF['pingback_self'] = 0;
// Link to the documentation from the Admin block (0 = hide link, 1 = show)
$_CONF['link_documentation'] = 1;
// Story Settings
$_CONF['maximagesperarticle'] = 5;
$_CONF['limitnews'] = 10;
$_CONF['minnews'] = 1; // minimum number of stories per page
$_CONF['contributedbyline'] = 1; // If 1, show contributed by line
$_CONF['hideviewscount'] = 0; // If 1, hide Viewed X times line
$_CONF['hideemailicon'] = 0; // If 1, hide "email story" option
$_CONF['hideprintericon'] = 0; // If 1, hide "printer friendly" option
$_CONF['allow_page_breaks'] = 1; // allow [page_break] in stories
$_CONF['page_break_comments'] = 'last'; // When an article has a page break,
// show comments on the 'first',
//'last' or 'all' pages?
$_CONF['article_image_align'] = 'right'; // Topic icon on left or right.
$_CONF['show_topic_icon'] = 1; // default for new stories
$_CONF['draft_flag'] = 0; // default for new stories
$_CONF['frontpage'] = 1; // default for new stories
$_CONF['hide_no_news_msg'] = 0; // If 1, hide No News To Display msg
$_CONF['hide_main_page_navigation'] = 0; // hide "google paging" on index.php
// When set to 1, only root users will be able to feature a story
$_CONF['onlyrootfeatures'] = 0;
// Advanced theme settings
// Set the default whether to display the right-side blocks (= true) or not
// (= false). In the default configuration, Geeklog will only display the
// right-side blocks on the index page. Please note that setting this to true
// will reduce the amount of space available for the actual page content,
// especially for users with narrow browser windows.
// May require theme changes in article/article.thtml (depending on the theme
// used) to avoid the What's Related and Story Options "blocks" showing up in
// an extra (fourth) column.
$_CONF['show_right_blocks'] = false;
// It is recommended to leave these unchanged and overwrite them in the theme's
// functions.php instead.
// When set to 1, this will render the first story on any page using the
// templates for featured stories - even if that story is not featured.
$_CONF['showfirstasfeatured'] = 0;
// When set to 1, this will make the {left_blocks} variable available in
// footer.thtml (and disable it in header.thtml). This is really only useful
// for two-column layouts where you want the left column contain the stories
// and the right column contain the standard blocks.
$_CONF['left_blocks_in_footer'] = 0;
// +---------------------------------------------------------------------------+
// | RSS feed settings |
// | |
// | Settings for RSS feeds (aka RDF feeds). Please note that most of these |
// | are merely default settings for the feeds created from the "Content |
// | Syndication" entry in the Admin's menu. |
// +---------------------------------------------------------------------------+
$_CONF['backend'] = 1; // 1 = activate feeds, 0 = off
// path to your site's default RSS feed
$_CONF['rdf_file'] = $_CONF['path_html'] . 'backend/geeklog.rss';
// This allows a person to limit the rss feed to a certain number of stories
// (e.g. 10 or 12) or else limit the rss feed to all stories within a certain
// period of time in hours (e.g. 24h or 168h).
$_CONF['rdf_limit'] = 10; // number of stories (10) or hours (24h)
// Include the story's entire intro text in the feed (= 1) or limit the number
// of characters from the intro text (any number > 1) or don't include the text
// at all (= 0).
$_CONF['rdf_storytext'] = 1;
// Default language for the feed - may have to be different than the locale
$_CONF['rdf_language'] = 'en-gb';
// Upper limit for all imported feeds (0 = unlimited, i.e. import all of the
// headlines from the feed).
// Individual limits can be set for every feed in the portal block's settings.
$_CONF['syndication_max_headlines'] = 0;
// Uncomment the following line to set the copyright year in the site's footer
// to a specific year. Otherwise, the current year will be used.
// $_CONF['copyrightyear'] = '2006';
// Optional Image Settings
// If you set $_CONF['image_lib'] below, you must supply a path for the library
// you will use. Setting this also assumes that if a photo is uploaded that is
// too big either by the image sizes below or by overriding them using the
// upload object then the library you choose will attempt to resize the image.
// Leaving this value empty disables this feature
$_CONF['image_lib'] = ''; // can be one of 'netpbm', 'imagemagick', 'gdlib'
// If you set image_lib to 'imagemagick' give the complete path to mogrify
// here (i.e. including the name of the executable), otherwise comment it out
// NOTE: requires ImageMagick version 5.4.9 (or newer)
//$_CONF['path_to_mogrify'] = '/path/to/mogrify';
// If you set image_lib to 'netpbm' give the path to the netpbm directory, you
// need the trailing slash here.
// NOTE: if you use NETPBM, use the latest package from the Gallery package for
// your operating system found at http://sourceforge.net/projects/gallery in
// the download section. You need to take the netpbm tarball from them and
// uncompress the file which will create a netpbm directory. If you plan to
// only use netpbm with Geeklog, put that entire folder in /path/to/geeklog and
// adjust the path below. The only programs you need from netpbm are giftopnm,
// jpegtopnm, pngtopnm, ppmtogif, pnmtojpeg, pnmtopng and pnmscale
//$_CONF['path_to_netpbm'] = '/path/to/netpbm/';
// Uncomment the following line if you experience problems with the image
// upload. Debug messages will be added to the error.log file.
// $_CONF['debug_image_upload'] = true;
// When set to 1, Geeklog will keep the original, unscaled images and make
// the smaller image link to the unscaled image.
$_CONF['keep_unscaled_image'] = 0; // 1 = keep original images
// when above is set to one and this here also, the user can choose between
// using the original or scaled image in a story
$_CONF['allow_user_scaling'] = 1; // 1 = allow the user to choose
// Story image settings
$_CONF['max_image_width'] = 160; // In pixels
$_CONF['max_image_height'] = 160; // In pixels
$_CONF['max_image_size'] = 1048576; // 1048576 = 1MB
// Topic icon settings
$_CONF['max_topicicon_width'] = 48; // In pixels
$_CONF['max_topicicon_height'] = 48; // In pixels
$_CONF['max_topicicon_size'] = 65536; // 65536 = 64KB
// User photo settings
$_CONF['max_photo_width'] = 128; // In pixels
$_CONF['max_photo_height'] = 128; // In pixels
$_CONF['max_photo_size'] = 65536; // 65536 = 64KB
// Use avatars from gravatar.com (if set = true).
// A gravatar will only be requested if there is no uploaded photo.
$_CONF['use_gravatar'] = false;
// gravatar.com provides "movie-style" ratings of the avatars (G, PG, R, X).
// Setting this to 'R' would allow avatars rated as G, PG, and R (but not X).
// $_CONF['gravatar_rating'] = 'R';
// Force a max. width when displaying the user photo (also used for gravatars)
// $_CONF['force_photo_width'] = 75;
// Use this image when there's neither an uploaded photo nor a gravatar.
// Should be the complete URL of the image.
// $_CONF['default_photo'] = 'http://example.com/default.jpg';
// Comment Settings
$_CONF['commentspeedlimit'] = 45; // minimum time between comment posts, in seconds
$_CONF['comment_limit'] = 100; // Default Number of Comments under Story
// Default Comment Mode; from 'threaded','nested', 'nocomments', or 'flat'
$_CONF['comment_mode'] = 'threaded';
// Allow / disallow comments to stories by default (can be changed individually for every story)
$_CONF['comment_code'] = 0; // 0 = comments enabled, -1 = disabled
// Password setting: minimum time between two requests for a new password
$_CONF['passwordspeedlimit'] = 300; // seconds = 5 minutes
// Login Speedlimit.
$_CONF['login_attempts'] = 3; // number of login attempts allowed before speedlimit kicks in
$_CONF['login_speedlimit'] = 300; // wait (in seconds) after $_CONF['login_attempts'] failed logins
// Parameters for checking HTML tags
// *** Warning: Adding the following tags to the list of allowable HTML can
// *** make your site vulnerable to scripting attacks!
// *** Use with care: <img> <span> <marquee> <script> <embed> <object> <iframe>
/* This is a list of HTML tags that users are allowed to use in their posts.
* Each tag can have a list of allowed attributes (see 'a' for an example).
* Any attributes not listed will be filtered, i.e. removed.
*/
$_CONF['user_html'] = array (
'p' => array(),
'b' => array(),
'strong' => array(),
'i' => array(),
'a' => array('href' => 1, 'title' => 1, 'rel' => 1),
'em' => array(),
'br' => array(),
'tt' => array(),
'hr' => array(),
'li' => array(),
'ol' => array(),
'ul' => array(),
'code' => array(),
'pre' => array()
);
/* This is a list of HTML tags that Admins (site admin and story admins) can
* use in their posts. It will be merged with the above list of user-allowable
* tags ($_CONF['user_html']). You can also add tags that have already been
* listed for the user-allowed HTML, so as to allow admins to use more
* attributes (see 'p' for an example).
*/
$_CONF['admin_html'] = array (
'p' => array('class' => 1, 'id' => 1, 'align' => 1),
'div' => array('class' => 1, 'id' => 1),
'span' => array('class' => 1, 'id' => 1),
'table' => array('class' => 1, 'id' => 1, 'width' => 1, 'border' => 1,
'cellspacing' => 1, 'cellpadding' => 1),
'tr' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1),
'th' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1,
'colspan' => 1, 'rowspan' => 1),
'td' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1,
'colspan' => 1, 'rowspan' => 1)
);
/* Optional HTML Tags that will be enabled if advanced editor is enabled
* Posible to add tags to the allowable general USER $_CONF['user_html'] as well
*/
if ($_CONF['advanced_editor']) {
$_CONF['admin_html']['a'] = array('href' => 1, 'title' => 1, 'id' => 1, 'lang' => 1, 'name' => 1, 'type' => 1, 'rel' => 1);
$_CONF['admin_html']['hr'] = array ('style' => 1);
$_CONF['admin_html']['ol'] = array ('style' => 1);
$_CONF['admin_html']['ul'] = array ('style' => 1);
$_CONF['admin_html']['caption'] = array ();
$_CONF['admin_html']['table'] = array ('class' => 1, 'id' => 1, 'style' => 1, 'align' => 1, 'width' => 1,
'border' => 1, 'cellspacing' => 1, 'cellpadding' => 1);
$_CONF['admin_html']['tbody'] = array ();
$_CONF['admin_html']['img'] = array('src' => 1, 'width' => 1, 'height' => 1, 'vspace' => 1, 'hspace' => 1,
'dir' => 1, 'align' => 1, 'valign' => 1, 'border' => 1, 'lang' => 1,
'longdesc' => 1, 'title' => 1, 'id' => 1, 'alt' => 1);
$_CONF['admin_html']['font'] = array('face' => 1, 'size' => 1, 'style' => 1);
}
// When set to 1, disables the HTML filter for all users in the 'Root' group.
// Obviously, you should only enable this if you know what you're doing and
// when you can trust all the users in the 'Root' group not to use this for
// Cross Site Scripting, defacements, etc. USE AT YOUR OWN RISK!
$_CONF['skip_html_filter_for_root'] = 0;
// list of protocols that are allowed in links
$_CONF['allowed_protocols'] = array ('http', 'https', 'ftp');
// disables autolinks if set to 1
$_CONF['disable_autolinks'] = 0; // 0 = autolinks enabled
// Parameters for checking for "bad" words
$_CONF['censormode'] = 1;
$_CONF['censorreplace'] = '*censored*';
$_CONF['censorlist'] = array('*censored*','*censored*','*censored*er','*censored*ing','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*ing','mother*censored*er');
// IP lookup support
//
// If $_CONF['ip_lookup'] contains the URL to a web-based service for IP
// address lookups, Geeklog will let you click on IP addresses so that you
// can find out where a visitor came from. This can either be a remote
// service or a plugin like Tom Willet's Nettools.
// The '*' in the URL will be replaced with the IP address to look up.
//
// uncomment this line if you have Tom Willet's Nettools installed
// $_CONF['ip_lookup'] = $_CONF['site_url'] . '/nettools/whois.php?domain=*';
// This feature, when activated, makes some of Geeklog's URLs more crawler
// friendly, i.e. more likely to be picked up by search engines.
// Only implemented for stories, static pages, and portal links right now.
//
// Note: Works with Apache (Linux and Windows successfully tested).
// Unresolvable issues with systems running IIS; known PHP CGI bug.
$_CONF['url_rewrite'] = false; // false = off, true = on
// Define default permissions for new objects created from the Admin panels.
// Permissions are perm_owner, perm_group, perm_members, perm_anon (in that
// order). Possible values:
// 3 = read + write permissions (perm_owner and perm_group only)
// 2 = read-only
// 0 = neither read nor write permissions
// (a value of 1, ie. write-only, does not make sense and is not allowed)
$_CONF['default_permissions_block'] = array (3, 2, 2, 2);
$_CONF['default_permissions_story'] = array (3, 2, 2, 2);
$_CONF['default_permissions_topic'] = array (3, 2, 2, 2);
// Define a few useful things for GL
if (!defined ('LB')) {
define('LB',"\n");
}
if (!defined ('VERSION')) {
define('VERSION', '1.4.1');
}
$_STATES = array(
'--'=>'',
'AL'=>'Alabama',
'AK'=>'Alaska',
'AZ'=>'Arizona',
'AR'=>'Arkansas',
'CA'=>'California',
'CO'=>'Colorado',
'CT'=>'Connecticut',
'DE'=>'Delaware',
'DC'=>'District of Columbia',
'FL'=>'Florida',
'GA'=>'Georgia',
'HI'=>'Hawaii',
'ID'=>'Idaho',
'IL'=>'Illinois',
'IN'=>'Indiana',
'IA'=>'Iowa',
'KS'=>'Kansas',
'KY'=>'Kentucky',
'LA'=>'Louisiana',
'ME'=>'Maine',
'MD'=>'Maryland',
'MA'=>'Massachusetts',
'MI'=>'Michigan',
'MN'=>'Minnesota',
'MS'=>'Mississippi',
'MO'=>'Missouri',
'MT'=>'Montana',
'NE'=>'Nebraska',
'NV'=>'Nevada',
'NH'=>'New Hampshire',
'NJ'=>'New Jersey',
'NM'=>'New Mexico',
'NY'=>'New York',
'NC'=>'North Carolina',
'ND'=>'North Dakota',
'OH'=>'Ohio',
'OK'=>'Oklahoma',
'OR'=>'Oregon',
'PA'=>'Pennsylvania',
'RI'=>'Rhode Island',
'SC'=>'South Carolina',
'SD'=>'South Dakota',
'TN'=>'Tennessee',
'TX'=>'Texas',
'UT'=>'Utah',
'VT'=>'Vermont',
'VA'=>'Virginia',
'WA'=>'Washington',
'WV'=>'West Virginia',
'WI'=>'Wisconsin',
'WY'=>'Wyoming'
);
?>
Here's my config.php file in totality
Text Formatted Code
<?php
/* Reminder: always indent with 4 spaces (no tabs). */
// +---------------------------------------------------------------------------+
// | Geeklog 1.4 |
// +---------------------------------------------------------------------------+
// | config.php |
// | |
// | Geeklog configuration file. |
// +---------------------------------------------------------------------------+
// | Copyright (C) 2001-2006 by the following authors: |
// | |
// | Authors: Tony Bibbs - tony AT tonybibbs DOT com |
// | Dirk Haun - dirk AT haun-online DOT de |
// +---------------------------------------------------------------------------+
// | |
// | This program is free software; you can redistribute it and/or |
// | modify it under the terms of the GNU General Public License |
// | as published by the Free Software Foundation; either version 2 |
// | of the License, or (at your option) any later version. |
// | |
// | This program is distributed in the hope that it will be useful, |
// | but WITHOUT ANY WARRANTY; without even the implied warranty of |
// | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
// | GNU General Public License for more details. |
// | |
// | You should have received a copy of the GNU General Public License |
// | along with this program; if not, write to the Free Software Foundation, |
// | Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
// | |
// +---------------------------------------------------------------------------+
// | See the docs/install.html and docs/config.html files for more information |
// | on configuration. |
// +---------------------------------------------------------------------------+
//
// $Id: config.php,v 1.240 2006/12/30 17:43:18 dhaun Exp $
// When setting up Geeklog for the first time, you need to make sure the
// settings in the following 3 sections are correct:
// (1) Database Settings
// (2) Paths
// (3) Site Settings
// You can adjust the other settings once your site is up and running.
// +---------------------------------------------------------------------------+
// | (1) Database Settings |
// +---------------------------------------------------------------------------+
$_DB_host = 'localhost'; // host name or IP address of your DB server
$_DB_name = 'geeklog'; // name of your database,
// must exist before running the installer!
$_DB_user = 'username'; // MySQL user name
$_DB_pass = 'password'; // MySQL password
// The table prefix is prepended to each table used by Geeklog to avoid name
// collisions with other tables that may already exist in your database.
$_DB_table_prefix = 'gl_'; // e.g. 'gl_'
// +---------------------------------------------------------------------------+
// | (2) Paths |
// +---------------------------------------------------------------------------+
// Note for Windows users: It's safe to use the forward slash '/' instead of
// the backslash '\' in paths. Make sure each path starts with a drive letter!
// This should point to the directory where your config.php file resides.
$_CONF['path'] = 'home/users/uks59246/html/'; // should end in a slash
// You only need to change this if you moved or renamed the public_html
// directory. In that case, you should specify the complete path to the
// directory (i.e. without the $_CONF['path']) like this:
// $_CONF['path_html'] = '/home/users/uks59246/html/idhsgb.com/';
$_CONF['path_html'] = $_CONF['path'] . 'idhsgb.com/';
// +---------------------------------------------------------------------------+
// | (3) Site Settings |
// +---------------------------------------------------------------------------+
// Make sure this is the correct URL to your site, i.e. to where Geeklog's
// index.php file resides (no trailing slash).
$_CONF['site_url'] = 'http://www.idhsgb.com';
// Some hosting services have a preconfigured admin directory. In that case,
// you need to rename Geeklog's admin directory to something like "myadmin"
// and change the following URL as well. Leave as is until you experience any
// problems accessing Geeklog's admin menu.
$_CONF['site_admin_url'] = $_CONF['site_url'] . '/admin';
// This is the return address for all email sent by Geeklog and contact info
// displayed in syndication feeds:
$_CONF['site_mail'] = 'admin@idhsgb.com';
// Name and slogan of your site
$_CONF['site_name'] = 'IDHS(GB)';
$_CONF['site_slogan'] = 'Irish Draught Horse Society (GB)';
// ****************************************************************************
// * If you set up Geeklog for the first time, you shouldn't need to change *
// * anything below this line. Come back here once the site is up and running.*
// ****************************************************************************
// Note: See the file docs/config.html for more information on the settings.
// +---------------------------------------------------------------------------+
// | OTHER PATH SETTINGS |
// | |
// | All paths must have a trailing slash ('/'). |
// +---------------------------------------------------------------------------+
// you shouldn't need to edit theses
$_CONF['path_system'] = $_CONF['path'] . 'system/';
$_CONF['path_log'] = $_CONF['path'] . 'logs/';
$_CONF['path_language'] = $_CONF['path'] . 'language/';
$_CONF['backup_path'] = $_CONF['path'] . 'backups/';
$_CONF['path_data'] = $_CONF['path'] . 'data/';
// If you set path_images to something other than the default, you will need to
// make sure that you add the following subdirectories to that directory:
// articles/, userphotos/
$_CONF['path_images'] = $_CONF['path_html'] . 'images/';
// +---------------------------------------------------------------------------+
// | PEAR Settings |
// | |
// | Geeklog uses PEAR to send emails (see "Email Settings" below). Here you |
// | can tell Geeklog whether to use the PEAR packages installed on your |
// | server or to use the included packages. |
// +---------------------------------------------------------------------------+
// If your server is running PHP 4.3.0 (or newer) then chances are that PEAR
// is already installed and you can change this to: $_CONF['have_pear'] = true;
$_CONF['have_pear'] = false;
// Geeklog comes with the necessary PEAR packages and will pick them up from
// the following directory if $_CONF['have_pear'] = false (above).
$_CONF['path_pear'] = $_CONF['path_system'] . 'pear/';
// +---------------------------------------------------------------------------+
// | Email Settings |
// | |
// | Configure how Geeklog sends email: Via PHP's mail() function, sendmail, |
// | or via an SMTP server. |
// +---------------------------------------------------------------------------+
// To send email from Geeklog, you will need to select one of the following
// email backends:
// - 'mail', i.e. use PHP's built-in mail() function
// - 'sendmail', i.e. use the sendmail utility
// - 'smtp', i.e. talk directly to your SMTP server
// The default is 'mail' and will work in most environments.
$_CONF['mail_settings'] = array (
'backend' => 'mail', // can be one of 'mail', 'sendmail', 'smtp'
// sendmail parameters (only needed for 'backend' => 'sendmail')
'sendmail_path' => '/usr/bin/sendmail',
'sendmail_args' => '',
// SMTP parameters (only needed for 'backend' => 'smtp')
'host' => 'smtp.example.com',
'port' => '25',
'auth' => false,
'username' => 'smtp-username',
'password' => 'smtp-password'
);
// +---------------------------------------------------------------------------+
// | OTHER DATABASE SETTINGS |
// | |
// | Database type and database backup settings. |
// +---------------------------------------------------------------------------+
$_DB_dbms = 'mysql'; // can be either 'mysql' or 'mssql' (Microsoft SQL Server)
// the following options are for MySQL only
// optional settings for making database backups from within Geeklog
$_CONF['allow_mysqldump'] = 1; // 1 = on, 0 = off
// full path of the mysqldump executable (Windows users: add ".exe"!)
$_DB_mysqldump_path = '/usr/bin/mysqldump';
// additional options for mysqldump
// If you're using InnoDB tables, include '--single-transaction' or you
// may end up with inconsistent backups!
$_CONF['mysqldump_options'] = '-Q';
// +---------------------------------------------------------------------------+
// | SITE SETTINGS |
// | |
// | These settings help define your Geeklog site. |
// +---------------------------------------------------------------------------+
$_CONF['theme'] = 'professional'; // default theme
// List of entries that you want to see in the site's menu bar (if you're using
// a theme that uses the {menu_elements} variable in its header.thtml).
// Choose any combination of the following (order here = order in the menu).
$_CONF['menu_elements'] = array
(
// 'home', // link to homepage
'contribute', // contribute / "submit a story" link
'search', // link to advanced search
'stats', // link to site stats
'directory', // link to list of past stories
// 'prefs', // link to user's preferences
'plugins' // links added by plugins, like {plg_menu_elements}
// 'custom' // for custom links (see lib-custom.php)
);
// you shouldn't need to edit the following
$_CONF['layout_url'] = $_CONF['site_url'] . '/layout/' . $_CONF['theme'];
$_CONF['path_themes'] = $_CONF['path_html'] . 'layout/';
$_CONF['path_layout'] = $_CONF['path_themes'] . $_CONF['theme'] . '/';
// stops new registrations if set to true.
$_CONF['disable_new_user_registration'] = false; // set to true to block users.
// optional settings (1 = on, 0 = off)
$_CONF['allow_user_themes'] = 1;
$_CONF['allow_user_language'] = 1;
$_CONF['allow_user_photo'] = 1; // allow users to upload self-photo
// Allow users to change their username (if set to 1).
$_CONF['allow_username_change'] = 0;
// Allow users to delete their account (if set to 1).
$_CONF['allow_account_delete'] = 0;
// hides the list of authors from the preferences
$_CONF['hide_author_exclusion'] = 0;
// Used by COM_getDisplayName to return Members's Full Name else username
$_CONF['show_fullname'] = 0; // 1 = show user's full name
// Used by COM_getDisplayName to return users remote login service, if they have one.
$_CONF['show_servicename'] = true; // Set to false to not show it.
// +---------------------------------------------------------------------------+
// | Support for custom user registration form and account details |
// | Requires custom functions to be written that can be placed in lib-custom |
// | Function hooks are in users.php, usersettings.php and admin/user.php |
// +---------------------------------------------------------------------------+
$_CONF['custom_registration'] = false; // Set to true if you have custom code
// +---------------------------------------------------------------------------+
// | Support for remote authentication of users, i.e. logging in via other |
// | supported remote servers. Requires custom classes in: |
// | system/classes/authentication/ |
// +---------------------------------------------------------------------------+
$_CONF['remoteauthentication'] = false; // Set to true to enable remote logins.
// +---------------------------------------------------------------------------+
// | Define action to be taken by Spam-X module if spam detected |
// | Current Spam-X module supports two actions which can be combined |
// | Additional classes can be added as well as other plugin extensions |
// | Actions: 128 = ignore comment and redirect to homepage |
// | 8 = mail admin message |
// | 136 (SUM) ignore and email admin |
// +---------------------------------------------------------------------------+
$_CONF['spamx'] = 128; // Default to ignore comment.
// +---------------------------------------------------------------------------+
// | Sort the links in the admin block and the admin panel. |
// +---------------------------------------------------------------------------+
$_CONF['sort_admin'] = true;
// +---------------------------------------------------------------------------+
// | Path to user files relative to the $_CONF['site_url'] (no trailing slash) |
// | Relative Directory where the Editor Image Library store |
// +---------------------------------------------------------------------------+
$_CONF_FCK['imagelibrary'] = '/images/library';
// +---------------------------------------------------------------------------+
// | LOCALE SETTINGS |
// | |
// | see docs/config.html#locale for details |
// +---------------------------------------------------------------------------+
$_CONF['language'] = 'english';
$_CONF['default_charset'] = 'iso-8859-1';
// Note: You may want to consider using 'utf-8' as the default character set
// for new sites, especially when using the multi-language support (see below).
// Make sure to use a matching language file, e.g. 'english_utf-8' then.
$_CONF['locale'] = 'en_GB';
$_CONF['date'] = '%A, %B %d %Y @ %I:%M %p %Z';
$_CONF['daytime'] = '%m/%d %I:%M%p';
$_CONF['shortdate'] = '%x';
$_CONF['dateonly'] = '%d-%b';
$_CONF['timeonly'] = '%I:%M%p';
$_CONF['week_start'] = 'Sun'; // can be 'Sun' or 'Mon'
$_CONF['hour_mode'] = 24; // 12 hour am/pm or 24 hour format
// Number formatting
$_CONF['thousand_separator'] = ","; // could be ' , . etc.
$_CONF['decimal_separator'] = "."; // could be , . etc.
$_CONF['decimal_count'] = "2"; // if a number has decimals,
// force to this depth
// Multi-language support
// (note that this section is commented out - remove the '/*' and '*/' lines
// below to activate it and make sure you understand what it does)
/*
// IMPORTANT!
// 1) Both the $_CONF['language_files'] and the $_CONF['languages'] arrays
// (see below) must have the same number of elements.
// 2) The shortcuts used must be the same in both arrays.
// 3) All shortcuts must have the same length, e.g. 2 characters.
// The shortcuts are to be used in IDs of objects that are multi-language
// aware, e.g. /article.php/introduction_en and /article.php/introduction_de
// for the English and German version of an introductory article.
// Supported languages
// Maps a shortcut to a Geeklog language file (without the '.php' extension)
$_CONF['language_files'] = array (
'en' => 'english_utf-8',
'de' => 'german_formal_utf-8'
);
// Display names of supported languages
// Maps the same shortcuts as above to a language name. The language names
// are used to let users switch languages, e.g. in a drop-down menu.
$_CONF['languages'] = array (
'en' => 'English',
'de' => 'Deutsch'
);
*/
// "Timezone Hack"
// If your webserver is located in a different timezone than yourself but you
// prefer Geeklog to post stories in your local time, then set your local
// timezone here.
//
// Please note that this does not work when safe_mode is on!
//
// For more information, see this discussion on geeklog.net:
// http://www.geeklog.net/forum/viewtopic.php?showtopic=21232
// $_CONF['timezone'] = 'Etc/GMT-6'; // e.g. 6 hours behind GMT
// +---------------------------------------------------------------------------+
// | SITE STATUS |
// | |
// | To disable your Geeklog site quickly, simply set this flag to false |
// +---------------------------------------------------------------------------+
$_CONF['site_enabled'] = true; // true or false
// Message shown when site is down
// When this starts with 'http:' visitors are redirected to that URL
$_CONF['site_disabled_msg'] = 'Geeklog Site is down. Please come back soon.';
// When set to true, this will display /detailed/ debug information in the event
// of a PHP error. ONLY set this to true with your non-production development
// environments!
$_CONF['rootdebug'] = false;
// +---------------------------------------------------------------------------+
// | SESSION SETTINGS |
// | |
// | cookie_ip will store md5(remoteip + randomnum) as the session ID in the |
// | cookie. This is more secure but will more than likely require dialed up |
// | users to login each and every time. If ipbasedsessid is turned off |
// | (which it is by default) it will just store a random number as the |
// | session ID in the cookie. |
// | |
// | default_perm_cookie_timeout is how long you want the permanent cookie |
// | to persist for (in seconds). This can be overridden by the user in |
// | their user prefs if they want. If you set the default to 0, users will |
// | have to log in again once their session expired. |
// | |
// | session_cookie_time is how long you want the session cookie to persist |
// | for. Only really useful in scenarios where you don't want to allow |
// | permanent cookies |
// +---------------------------------------------------------------------------+
$_CONF['cookie_session'] = 'gl_session';
$_CONF['cookie_name'] = 'geeklog';
$_CONF['cookie_password'] = 'password';
$_CONF['cookie_theme'] = 'theme';
$_CONF['cookie_language'] = 'language';
$_CONF['cookie_ip'] = 0;
$_CONF['default_perm_cookie_timeout'] = 28800;
$_CONF['session_cookie_timeout'] = 7200;
$_CONF['cookie_path'] = '/';
$_CONF['cookiedomain'] = ''; // e.g. '.example.com'
$_CONF['cookiesecure'] = 0;
// Geeklog keeps track of when a user last logged in. Set this to false
// if you don't want that.
$_CONF['lastlogin'] = true;
// +---------------------------------------------------------------------------+
// | This is really redundant but I am including this as a reminder that those |
// | people writing Geeklog Plugins that are OS dependent should check either |
// | the $_CONF variable below or PHP_OS directly. If you are writing an |
// | addon that is OS specific your addon should check the system is using the |
// | right OS. If not, be sure to show a friendly message that says their GL |
// | distro isn't running the right OS. Do not modify this value |
// +---------------------------------------------------------------------------+
$_CONF['ostype'] = PHP_OS;
// Note: PDF conversion didn't make it into this release. Leave as is.
$_CONF['pdf_enabled'] = 0;
// +---------------------------------------------------------------------------+
// | SEARCH SETTINGS |
// +---------------------------------------------------------------------------+
// default number of search results (per type) to be displayed per page
$_CONF['num_search_results'] = 10;
// +---------------------------------------------------------------------------+
// | MISCELLANEOUS SETTINGS |
// | |
// | These are other various Geeklog settings. The defaults should work OK |
// | for most situations. |
// +---------------------------------------------------------------------------+
// this lets you select which functions are available for registered users only
$_CONF['loginrequired'] = 0; // all of them, if set to 1 will override all else
$_CONF['submitloginrequired'] = 0;
$_CONF['commentsloginrequired'] = 0;
$_CONF['statsloginrequired'] = 0;
$_CONF['searchloginrequired'] = 0;
$_CONF['profileloginrequired'] = 0;
$_CONF['emailuserloginrequired'] = 0;
$_CONF['emailstoryloginrequired'] = 0;
$_CONF['directoryloginrequired'] = 0;
// Submission Settings
// enable (set to 1) or disable (set to 0) submission queues:
$_CONF['storysubmission'] = 1;
$_CONF['usersubmission'] = 0; // 1 = new users must be approved
// When set to 1, this will display an additional block on the submissions page
// that lists all stories that have the 'draft' flag set.
$_CONF['listdraftstories'] = 0;
// Send an email notification when a new submission has been made. The contents
// of the array can be any combination of 'story', 'comment', 'trackback',
// 'pingback', and 'user'.
// Example: $_CONF['notification'] = array ('story', 'comment');
// The email will be sent to $_CONF['site_mail'] (see above).
$_CONF['notification'] = array ();
$_CONF['postmode'] = 'plaintext'; // can be 'plaintext' or 'html'
$_CONF['speedlimit'] = 45; // in seconds
$_CONF['skip_preview'] = 0; // If = 1, allow user to submit comments and stories without previewing
// +---------------------------------------------------------------------------+
// | Support for custom templates to support advanced Rich Text Editor |
// | Checked in comment.php, submit.php, admin/story.php and |
// | staticpages/index.php. If set true and advanced template exists |
// | Note: If enabled, the default postmode will be html |
// +---------------------------------------------------------------------------+
$_CONF['advanced_editor'] = false;
// +---------------------------------------------------------------------------+
// | Internal Geeklog CRON or scheduled Task/Function setting |
// | Plugins can use the runScheduledTask API to activate any automated tasks |
// | or add code in lib-custom to the CUSTOM_runScheduledTask function |
// +---------------------------------------------------------------------------+
$_CONF['cron_schedule_interval'] = 86400; // Seconds - Default 1 day
// Topic Settings
// Topics can be assigned a sort number so that you can control what order they
// appear in the 'Topics' block on the homepage. If you prefer you can also
// have this sort alphabetically by changing the value to 'alpha' (default is
// by 'sortnum'
$_CONF['sortmethod'] = 'sortnum'; // or 'alpha'
// Show the number of stories in a topic in Topics Block
$_CONF['showstorycount'] = 1;
// Show the number of story submissions for a topic in Topics Block
$_CONF['showsubmissioncount'] = 1;
// Hide 'Home' link from Topics block (if set to 1)
$_CONF['hide_home_link'] = 0;
// Who's Online block settings
// How long an anonymous (guest) user session is good for
$_CONF['whosonline_threshold'] = 300; // in seconds
// If set to 1, don't show names of registered users to anonymous users
$_CONF['whosonline_anonymous'] = 0; // 1 = don't show names to anon. users
// "Daily Digest" settings
// Let users get stories emailed to them
// Requires cron and the use of php as a shell script
$_CONF['emailstories'] = 0;
// Specify length of stories in those emails:
// 0 = send only title + link, 1 = send entire introtext,
// any other number = max. number of characters per story
$_CONF['emailstorieslength'] = 1;
// New users get stories emailed to them per default (= 1) or not (= 0)
$_CONF['emailstoriesperdefault'] = 0;
// When user submission is activated, allow users from these domains to
// register without having to go through the submission queue.
$_CONF['allow_domains'] = ''; // e.g. 'mycompany.com,myothercompany.com'
// Comma-separated list of domain names that are not allowed for new user
// signups (for all new registrations - not only for the user submission queue)
$_CONF['disallow_domains'] = ''; // e.g. 'somebaddomain.com,anotherbadone.com'
// Following times are in seconds
$_CONF['newstoriesinterval'] = 86400; // = 24 hours
$_CONF['newcommentsinterval'] = 172800; // = 48 hours
$_CONF['newtrackbackinterval'] = 172800; // = 48 hours
// Set to 1 to hide a section from the What's New block:
$_CONF['hidenewstories'] = 0;
$_CONF['hidenewcomments'] = 0;
$_CONF['hidenewtrackbacks'] = 0;
$_CONF['hidenewplugins'] = 0;
// max. length of titles to be displayed in the What's New block
$_CONF['title_trim_length'] = 20;
// Disable trackback comments by setting this to 'false'
$_CONF['trackback_enabled'] = true;
// Disable pingbacks by setting this to 'false'
$_CONF['pingback_enabled'] = true;
// Disable pinging weblog directory services by setting this to 'false'.
$_CONF['ping_enabled'] = true;
// Allow / disallow trackbacks and pingbacks to stories by default
// (can be changed individually for every story)
$_CONF['trackback_code'] = 0; // 0 = trackbacks enabled, -1 = disabled
// how to handle multiple trackbacks and pingbacks from the same URL:
// 0 = reject, 1 = only keep the latest, 2 = allow multiple posts
$_CONF['multiple_trackbacks'] = 0;
// min. time between trackbacks or pingbacks, in seconds
$_CONF['trackbackspeedlimit'] = 300;
// Use this option to check the validity of Trackbacks:
// 0 = don't check anything,
// 1 = check against $_CONF['site_url'], 2 = check full URL
// 4 = check IP address of sender against the site's IP in the Trackback
// add the values to do more than one check, e.g. 2 + 4 = 6, i.e. check URL + IP
$_CONF['check_trackback_link'] = 2;
// how to handle pingbacks from one article on our site to another:
// 0 = skip, 1 = allow, with speed limit, 2 = allow, without speed limit
$_CONF['pingback_self'] = 0;
// Link to the documentation from the Admin block (0 = hide link, 1 = show)
$_CONF['link_documentation'] = 1;
// Story Settings
$_CONF['maximagesperarticle'] = 5;
$_CONF['limitnews'] = 10;
$_CONF['minnews'] = 1; // minimum number of stories per page
$_CONF['contributedbyline'] = 1; // If 1, show contributed by line
$_CONF['hideviewscount'] = 0; // If 1, hide Viewed X times line
$_CONF['hideemailicon'] = 0; // If 1, hide "email story" option
$_CONF['hideprintericon'] = 0; // If 1, hide "printer friendly" option
$_CONF['allow_page_breaks'] = 1; // allow [page_break] in stories
$_CONF['page_break_comments'] = 'last'; // When an article has a page break,
// show comments on the 'first',
//'last' or 'all' pages?
$_CONF['article_image_align'] = 'right'; // Topic icon on left or right.
$_CONF['show_topic_icon'] = 1; // default for new stories
$_CONF['draft_flag'] = 0; // default for new stories
$_CONF['frontpage'] = 1; // default for new stories
$_CONF['hide_no_news_msg'] = 0; // If 1, hide No News To Display msg
$_CONF['hide_main_page_navigation'] = 0; // hide "google paging" on index.php
// When set to 1, only root users will be able to feature a story
$_CONF['onlyrootfeatures'] = 0;
// Advanced theme settings
// Set the default whether to display the right-side blocks (= true) or not
// (= false). In the default configuration, Geeklog will only display the
// right-side blocks on the index page. Please note that setting this to true
// will reduce the amount of space available for the actual page content,
// especially for users with narrow browser windows.
// May require theme changes in article/article.thtml (depending on the theme
// used) to avoid the What's Related and Story Options "blocks" showing up in
// an extra (fourth) column.
$_CONF['show_right_blocks'] = false;
// It is recommended to leave these unchanged and overwrite them in the theme's
// functions.php instead.
// When set to 1, this will render the first story on any page using the
// templates for featured stories - even if that story is not featured.
$_CONF['showfirstasfeatured'] = 0;
// When set to 1, this will make the {left_blocks} variable available in
// footer.thtml (and disable it in header.thtml). This is really only useful
// for two-column layouts where you want the left column contain the stories
// and the right column contain the standard blocks.
$_CONF['left_blocks_in_footer'] = 0;
// +---------------------------------------------------------------------------+
// | RSS feed settings |
// | |
// | Settings for RSS feeds (aka RDF feeds). Please note that most of these |
// | are merely default settings for the feeds created from the "Content |
// | Syndication" entry in the Admin's menu. |
// +---------------------------------------------------------------------------+
$_CONF['backend'] = 1; // 1 = activate feeds, 0 = off
// path to your site's default RSS feed
$_CONF['rdf_file'] = $_CONF['path_html'] . 'backend/geeklog.rss';
// This allows a person to limit the rss feed to a certain number of stories
// (e.g. 10 or 12) or else limit the rss feed to all stories within a certain
// period of time in hours (e.g. 24h or 168h).
$_CONF['rdf_limit'] = 10; // number of stories (10) or hours (24h)
// Include the story's entire intro text in the feed (= 1) or limit the number
// of characters from the intro text (any number > 1) or don't include the text
// at all (= 0).
$_CONF['rdf_storytext'] = 1;
// Default language for the feed - may have to be different than the locale
$_CONF['rdf_language'] = 'en-gb';
// Upper limit for all imported feeds (0 = unlimited, i.e. import all of the
// headlines from the feed).
// Individual limits can be set for every feed in the portal block's settings.
$_CONF['syndication_max_headlines'] = 0;
// Uncomment the following line to set the copyright year in the site's footer
// to a specific year. Otherwise, the current year will be used.
// $_CONF['copyrightyear'] = '2006';
// Optional Image Settings
// If you set $_CONF['image_lib'] below, you must supply a path for the library
// you will use. Setting this also assumes that if a photo is uploaded that is
// too big either by the image sizes below or by overriding them using the
// upload object then the library you choose will attempt to resize the image.
// Leaving this value empty disables this feature
$_CONF['image_lib'] = ''; // can be one of 'netpbm', 'imagemagick', 'gdlib'
// If you set image_lib to 'imagemagick' give the complete path to mogrify
// here (i.e. including the name of the executable), otherwise comment it out
// NOTE: requires ImageMagick version 5.4.9 (or newer)
//$_CONF['path_to_mogrify'] = '/path/to/mogrify';
// If you set image_lib to 'netpbm' give the path to the netpbm directory, you
// need the trailing slash here.
// NOTE: if you use NETPBM, use the latest package from the Gallery package for
// your operating system found at http://sourceforge.net/projects/gallery in
// the download section. You need to take the netpbm tarball from them and
// uncompress the file which will create a netpbm directory. If you plan to
// only use netpbm with Geeklog, put that entire folder in /path/to/geeklog and
// adjust the path below. The only programs you need from netpbm are giftopnm,
// jpegtopnm, pngtopnm, ppmtogif, pnmtojpeg, pnmtopng and pnmscale
//$_CONF['path_to_netpbm'] = '/path/to/netpbm/';
// Uncomment the following line if you experience problems with the image
// upload. Debug messages will be added to the error.log file.
// $_CONF['debug_image_upload'] = true;
// When set to 1, Geeklog will keep the original, unscaled images and make
// the smaller image link to the unscaled image.
$_CONF['keep_unscaled_image'] = 0; // 1 = keep original images
// when above is set to one and this here also, the user can choose between
// using the original or scaled image in a story
$_CONF['allow_user_scaling'] = 1; // 1 = allow the user to choose
// Story image settings
$_CONF['max_image_width'] = 160; // In pixels
$_CONF['max_image_height'] = 160; // In pixels
$_CONF['max_image_size'] = 1048576; // 1048576 = 1MB
// Topic icon settings
$_CONF['max_topicicon_width'] = 48; // In pixels
$_CONF['max_topicicon_height'] = 48; // In pixels
$_CONF['max_topicicon_size'] = 65536; // 65536 = 64KB
// User photo settings
$_CONF['max_photo_width'] = 128; // In pixels
$_CONF['max_photo_height'] = 128; // In pixels
$_CONF['max_photo_size'] = 65536; // 65536 = 64KB
// Use avatars from gravatar.com (if set = true).
// A gravatar will only be requested if there is no uploaded photo.
$_CONF['use_gravatar'] = false;
// gravatar.com provides "movie-style" ratings of the avatars (G, PG, R, X).
// Setting this to 'R' would allow avatars rated as G, PG, and R (but not X).
// $_CONF['gravatar_rating'] = 'R';
// Force a max. width when displaying the user photo (also used for gravatars)
// $_CONF['force_photo_width'] = 75;
// Use this image when there's neither an uploaded photo nor a gravatar.
// Should be the complete URL of the image.
// $_CONF['default_photo'] = 'http://example.com/default.jpg';
// Comment Settings
$_CONF['commentspeedlimit'] = 45; // minimum time between comment posts, in seconds
$_CONF['comment_limit'] = 100; // Default Number of Comments under Story
// Default Comment Mode; from 'threaded','nested', 'nocomments', or 'flat'
$_CONF['comment_mode'] = 'threaded';
// Allow / disallow comments to stories by default (can be changed individually for every story)
$_CONF['comment_code'] = 0; // 0 = comments enabled, -1 = disabled
// Password setting: minimum time between two requests for a new password
$_CONF['passwordspeedlimit'] = 300; // seconds = 5 minutes
// Login Speedlimit.
$_CONF['login_attempts'] = 3; // number of login attempts allowed before speedlimit kicks in
$_CONF['login_speedlimit'] = 300; // wait (in seconds) after $_CONF['login_attempts'] failed logins
// Parameters for checking HTML tags
// *** Warning: Adding the following tags to the list of allowable HTML can
// *** make your site vulnerable to scripting attacks!
// *** Use with care: <img> <span> <marquee> <script> <embed> <object> <iframe>
/* This is a list of HTML tags that users are allowed to use in their posts.
* Each tag can have a list of allowed attributes (see 'a' for an example).
* Any attributes not listed will be filtered, i.e. removed.
*/
$_CONF['user_html'] = array (
'p' => array(),
'b' => array(),
'strong' => array(),
'i' => array(),
'a' => array('href' => 1, 'title' => 1, 'rel' => 1),
'em' => array(),
'br' => array(),
'tt' => array(),
'hr' => array(),
'li' => array(),
'ol' => array(),
'ul' => array(),
'code' => array(),
'pre' => array()
);
/* This is a list of HTML tags that Admins (site admin and story admins) can
* use in their posts. It will be merged with the above list of user-allowable
* tags ($_CONF['user_html']). You can also add tags that have already been
* listed for the user-allowed HTML, so as to allow admins to use more
* attributes (see 'p' for an example).
*/
$_CONF['admin_html'] = array (
'p' => array('class' => 1, 'id' => 1, 'align' => 1),
'div' => array('class' => 1, 'id' => 1),
'span' => array('class' => 1, 'id' => 1),
'table' => array('class' => 1, 'id' => 1, 'width' => 1, 'border' => 1,
'cellspacing' => 1, 'cellpadding' => 1),
'tr' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1),
'th' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1,
'colspan' => 1, 'rowspan' => 1),
'td' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1,
'colspan' => 1, 'rowspan' => 1)
);
/* Optional HTML Tags that will be enabled if advanced editor is enabled
* Posible to add tags to the allowable general USER $_CONF['user_html'] as well
*/
if ($_CONF['advanced_editor']) {
$_CONF['admin_html']['a'] = array('href' => 1, 'title' => 1, 'id' => 1, 'lang' => 1, 'name' => 1, 'type' => 1, 'rel' => 1);
$_CONF['admin_html']['hr'] = array ('style' => 1);
$_CONF['admin_html']['ol'] = array ('style' => 1);
$_CONF['admin_html']['ul'] = array ('style' => 1);
$_CONF['admin_html']['caption'] = array ();
$_CONF['admin_html']['table'] = array ('class' => 1, 'id' => 1, 'style' => 1, 'align' => 1, 'width' => 1,
'border' => 1, 'cellspacing' => 1, 'cellpadding' => 1);
$_CONF['admin_html']['tbody'] = array ();
$_CONF['admin_html']['img'] = array('src' => 1, 'width' => 1, 'height' => 1, 'vspace' => 1, 'hspace' => 1,
'dir' => 1, 'align' => 1, 'valign' => 1, 'border' => 1, 'lang' => 1,
'longdesc' => 1, 'title' => 1, 'id' => 1, 'alt' => 1);
$_CONF['admin_html']['font'] = array('face' => 1, 'size' => 1, 'style' => 1);
}
// When set to 1, disables the HTML filter for all users in the 'Root' group.
// Obviously, you should only enable this if you know what you're doing and
// when you can trust all the users in the 'Root' group not to use this for
// Cross Site Scripting, defacements, etc. USE AT YOUR OWN RISK!
$_CONF['skip_html_filter_for_root'] = 0;
// list of protocols that are allowed in links
$_CONF['allowed_protocols'] = array ('http', 'https', 'ftp');
// disables autolinks if set to 1
$_CONF['disable_autolinks'] = 0; // 0 = autolinks enabled
// Parameters for checking for "bad" words
$_CONF['censormode'] = 1;
$_CONF['censorreplace'] = '*censored*';
$_CONF['censorlist'] = array('*censored*','*censored*','*censored*er','*censored*ing','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*ing','mother*censored*er');
// IP lookup support
//
// If $_CONF['ip_lookup'] contains the URL to a web-based service for IP
// address lookups, Geeklog will let you click on IP addresses so that you
// can find out where a visitor came from. This can either be a remote
// service or a plugin like Tom Willet's Nettools.
// The '*' in the URL will be replaced with the IP address to look up.
//
// uncomment this line if you have Tom Willet's Nettools installed
// $_CONF['ip_lookup'] = $_CONF['site_url'] . '/nettools/whois.php?domain=*';
// This feature, when activated, makes some of Geeklog's URLs more crawler
// friendly, i.e. more likely to be picked up by search engines.
// Only implemented for stories, static pages, and portal links right now.
//
// Note: Works with Apache (Linux and Windows successfully tested).
// Unresolvable issues with systems running IIS; known PHP CGI bug.
$_CONF['url_rewrite'] = false; // false = off, true = on
// Define default permissions for new objects created from the Admin panels.
// Permissions are perm_owner, perm_group, perm_members, perm_anon (in that
// order). Possible values:
// 3 = read + write permissions (perm_owner and perm_group only)
// 2 = read-only
// 0 = neither read nor write permissions
// (a value of 1, ie. write-only, does not make sense and is not allowed)
$_CONF['default_permissions_block'] = array (3, 2, 2, 2);
$_CONF['default_permissions_story'] = array (3, 2, 2, 2);
$_CONF['default_permissions_topic'] = array (3, 2, 2, 2);
// Define a few useful things for GL
if (!defined ('LB')) {
define('LB',"\n");
}
if (!defined ('VERSION')) {
define('VERSION', '1.4.1');
}
$_STATES = array(
'--'=>'',
'AL'=>'Alabama',
'AK'=>'Alaska',
'AZ'=>'Arizona',
'AR'=>'Arkansas',
'CA'=>'California',
'CO'=>'Colorado',
'CT'=>'Connecticut',
'DE'=>'Delaware',
'DC'=>'District of Columbia',
'FL'=>'Florida',
'GA'=>'Georgia',
'HI'=>'Hawaii',
'ID'=>'Idaho',
'IL'=>'Illinois',
'IN'=>'Indiana',
'IA'=>'Iowa',
'KS'=>'Kansas',
'KY'=>'Kentucky',
'LA'=>'Louisiana',
'ME'=>'Maine',
'MD'=>'Maryland',
'MA'=>'Massachusetts',
'MI'=>'Michigan',
'MN'=>'Minnesota',
'MS'=>'Mississippi',
'MO'=>'Missouri',
'MT'=>'Montana',
'NE'=>'Nebraska',
'NV'=>'Nevada',
'NH'=>'New Hampshire',
'NJ'=>'New Jersey',
'NM'=>'New Mexico',
'NY'=>'New York',
'NC'=>'North Carolina',
'ND'=>'North Dakota',
'OH'=>'Ohio',
'OK'=>'Oklahoma',
'OR'=>'Oregon',
'PA'=>'Pennsylvania',
'RI'=>'Rhode Island',
'SC'=>'South Carolina',
'SD'=>'South Dakota',
'TN'=>'Tennessee',
'TX'=>'Texas',
'UT'=>'Utah',
'VT'=>'Vermont',
'VA'=>'Virginia',
'WA'=>'Washington',
'WV'=>'West Virginia',
'WI'=>'Wisconsin',
'WY'=>'Wyoming'
);
?>
38
45
Quote
New to php
Anonymous
:helpme: Hey guys, with143 views..........is no-one willing to help me on this ?? I know I'm probably being d**** stoopid here.......but hey, didn't we all start out at this l evel ?????? :banghead: :banghead: :banghead: :banghead:
48
44
Quote
Status: offline
jmucchiello
Forum User
Full Member
Registered: 08/29/05
Posts: 985
Quote by: New to php
If this is true, what error are you getting now? Got the mysql.class.php file in the correct place - I think ??
36
30
Quote
New to php
Anonymous
Solved this one...thanks everyone..... I was missing a trailing slash at the start of $_CONF['path']
It now sets up tables etc; but when it goes to 'success' page, I get..........
'Unfortunately, an error has occurred rendering this page. Please try again later.' ???????
It now sets up tables etc; but when it goes to 'success' page, I get..........
'Unfortunately, an error has occurred rendering this page. Please try again later.' ???????
37
42
Quote
Status: offline
Dirk
Site Admin
Admin
Registered: 01/12/02
Posts: 13073
Location:Stuttgart, Germany
New to php
Anonymous
:banghead: :banghead: :banghead: I've obviously got the require_once line in lib-common.php WRONG, but just cannot seem to get it to work.
I've changed the site structure by moving all the public_html files into a folder called 'web' - (I want to use a splash index page) - the path is now 'home/users/uks59246/html/idhsgb.com/web/'
I'm not convinced that I've got the config.php (paths) correct, or require_once line in lib-common.php. I get the ''Unfortunately, an error has occurred rendering this page. Please try again later.' error whether I try installing or running check.php.
I'm fin with html, css and javascript, just (really) early days with php.
I've used 4 other cms in the past without any of this (not gonna name them) - why I do much prefer GL !!!!! Mebbe you guys will help me stay with it - is anyone willing to check my config.php, lib-common.php, and anything else that can effect installation ???????
Thanx in advance :
I've changed the site structure by moving all the public_html files into a folder called 'web' - (I want to use a splash index page) - the path is now 'home/users/uks59246/html/idhsgb.com/web/'
I'm not convinced that I've got the config.php (paths) correct, or require_once line in lib-common.php. I get the ''Unfortunately, an error has occurred rendering this page. Please try again later.' error whether I try installing or running check.php.
I'm fin with html, css and javascript, just (really) early days with php.
I've used 4 other cms in the past without any of this (not gonna name them) - why I do much prefer GL !!!!! Mebbe you guys will help me stay with it - is anyone willing to check my config.php, lib-common.php, and anything else that can effect installation ???????
Thanx in advance :
40
32
Quote
Status: offline
jmucchiello
Forum User
Full Member
Registered: 08/29/05
Posts: 985
$_CONF['path'] = '/home/users/uks59246/html/'
$_CONF['path_html'] = '/home/users/uks59246/html/idhsgb.com/web/'
$_CONF['site_url'] = 'http://www.idhsgb.com/web';
in lib-common:
require_once '/home/users/uks59246/html/config.php';
Everything else should default correctly assuming you haven't moved anything.
$_CONF['path_html'] = '/home/users/uks59246/html/idhsgb.com/web/'
$_CONF['site_url'] = 'http://www.idhsgb.com/web';
in lib-common:
require_once '/home/users/uks59246/html/config.php';
Everything else should default correctly assuming you haven't moved anything.
35
34
Quote
New to php
Anonymous
Nope, haven't moved anything else - copied your instructions EXACTLY, then ran - http://www.idhsgb.com/web/admin/install/check.php
This is what I got - Parse error: syntax error, unexpected T_VARIABLE in /home/users/uks59246/html/config.php on line 83
????
Is GeekLog 2 gonna make life easier for peeeps like me ??????
This is what I got - Parse error: syntax error, unexpected T_VARIABLE in /home/users/uks59246/html/config.php on line 83
????
Is GeekLog 2 gonna make life easier for peeeps like me ??????
40
36
Quote
Status: offline
Dirk
Site Admin
Admin
Registered: 01/12/02
Posts: 13073
Location:Stuttgart, Germany
:rtfm: http://www.geeklog.net/docs/install.html#parse-error
A new installer is currently under development as part of the Summer of Code.
bye, Dirk
Quote by: New to php
Is GeekLog 2 gonna make life easier for peeeps like me ??????
A new installer is currently under development as part of the Summer of Code.
bye, Dirk
38
37
Quote
new to php
Anonymous
this is Line 83 (as quoted in the error) -
$_CONF['site_url'] = 'http://www.idhsgb.com/web';
$_CONF['site_url'] = 'http://www.idhsgb.com/web';
40
43
Quote
Page navigation
All times are EST. The time is now 02:44 pm.
- Normal Topic
- Sticky Topic
- Locked Topic
- New Post
- Sticky Topic W/ New Post
- Locked Topic W/ New Post
- View Anonymous Posts
- Able to post
- Filtered HTML Allowed
- Censored Content