Welcome to Geeklog, Anonymous Tuesday, December 10 2024 @ 06:29 pm EST
Geeklog Forums
Inmemoriam bug report
Page navigation
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
here is another bug that just got fixed (in my working copy ).
when you accept a submission and edit it in the queue or anytime after it has been approved, the owner will change to current uid rather than the contributor.
It's a quickchange on line 280 of media.php from $_USER['uid'] to $M['owner_id'].
when you accept a submission and edit it in the queue or anytime after it has been approved, the owner will change to current uid rather than the contributor.
It's a quickchange on line 280 of media.php from $_USER['uid'] to $M['owner_id'].
45
50
Quote
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
Hey, Trinity, in another thread, midiman (that's his username) was having the same issue as you are and it was fixed after he had checked and changed permissions on those pear files. Might want to check that.
48
51
Quote
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
last bug of the day cuz I have to get some sleep.
images that are still in the submission queue are displayed in the random image block, the featured album thumb review, as well as being displayed as a representative album thumb. of course that is not good, so I fixed it. I cut 'em off!
images that are still in the submission queue are displayed in the random image block, the featured album thumb review, as well as being displayed as a representative album thumb. of course that is not good, so I fixed it. I cut 'em off!
58
41
Quote
Dustin Flesher
Anonymous
I've got the same problem as Trinity. Images aren't showing up. Thumbnails aren't being generated. I get an error related to PEAR_Error::load. have_pear=false. The pear files are in the right place. I checked the include_path. system/pear is included. Any ideas?
30
44
Quote
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
Quote by Dustin Flesher: Any ideas?
check your file permissions as well. this worked for another person that has the same issue as trinity. I havn't heard back from trinity so I don't know if that is the prob or not.let's just test something shall we?
*append
Image/Transform.php
to your $_CONF['path_pear'] and use that path in image-functions.inc on line 31 rather than simply Image/Transform.php
.For example,
require_once(path/to/system/pear/Image/Transform.php);
You will have to go through image/transform.php and image/driver/gd.php at the very least and search for include_once or require_once and edit pear paths accordingly. If your issue is not a path issue, then this effort will not make any difference.
On the other hand, if this effort does work for you, then you have simply misplaced the included pear files.
after that, I have no idea. if your path is good and your files are properly placed as I've outlined in previous posts and also mentioned in the install instructions, and your permissions are such that php can access those files, then all should be well. otherwise you'll have to recheck these things.
48
44
Quote
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
by the way, trinity and Dustin, do you have safe mode enabled? that may cause an issue with setting the path to gl's pear.
36
37
Quote
Status: offline
mrcraig52
Forum User
Newbie
Registered: 09/09/05
Posts: 3
ok, this isn't really a bug, but just a question.
in the random image block, is it possible to show just the image without the caption? I've tried my best to figure it out on my own, but I'm pretty new at this stuff.
i absolutely love this plugin, I can't wait to see how it develops.
in the random image block, is it possible to show just the image without the caption? I've tried my best to figure it out on my own, but I'm pretty new at this stuff.
i absolutely love this plugin, I can't wait to see how it develops.
45
51
Quote
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
Quote by mrcraig52:in the random image block, is it possible to show just the image without the caption?
find the function inm_getRandomMedia() in the functions.inc file.look for the following code and either comment it out or delete it.
Text Formatted Code
if (!empty($A['caption'])){if (strlen(trim(stripslashes($A['caption']))) > 64){
$retval .= '<p>' . substr(trim(stripslashes($A['caption'])), 0, 64) . '...</p>';
} else $retval .= '<p>' . trim(stripslashes($A['caption'])) . '</p>';
}
39
45
Quote
Status: offline
trinity
Forum User
Regular Poster
Registered: 01/30/05
Posts: 80
I checked permisons and everything is ok. Also safe mode isnt an issue eather. i was wondering whether it could be that i am useing a user acount based webroot as in /~trinity/ but i cant find anything that would seem to indicate that. Could it be something to do with the cvs version of geeklog?
glFusion - Technology Fused with Style - www.gllabs.org
glFusion - Technology Fused with Style - www.gllabs.org
40
52
Quote
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
sorry Trinity, I've just finished looking thru the CVS differences and I don't find anything that might cause this irregularity. If you have a Geeklog 1.3.11sr1 release available on your server setup, see if you have the same issues with Inmemoriam on that install.
52
38
Quote
Dustin Flesher
Anonymous
I'm using 1.3.11sr1. I also am not using the standard file path scheme. That is, I'm not mapping the base url name to Geeklog's public_html. I suspect we've got a relative path problem somewhere.
42
50
Quote
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
Trinity and Dustin, geeklog utilizes the pear mail package in the same way as what we are trying to accomplish. Does your site send mail without any path issues?
indulge me guys, check that the following path is valid on your systems:
$_CONF['path_pear'] . Image/Transform/Driver/GD.php
for the $_CONF['path_pear'], please use the path as you see it in your include_path.
all that stuff aside, cuz i'm sure you're tired of checking and rechecking your paths and permissions... The only other thing that would cause your issue is if you're running without the GD library at all (cant help you here), or if you are running GD1 or the non-bundled version of GD2 (easy fix).
Quote by dustin:I checked the include_path. system/pear is included
just checking, your include path shows the full path to pear and not just system/pear, right?indulge me guys, check that the following path is valid on your systems:
$_CONF['path_pear'] . Image/Transform/Driver/GD.php
for the $_CONF['path_pear'], please use the path as you see it in your include_path.
all that stuff aside, cuz i'm sure you're tired of checking and rechecking your paths and permissions... The only other thing that would cause your issue is if you're running without the GD library at all (cant help you here), or if you are running GD1 or the non-bundled version of GD2 (easy fix).
46
47
Quote
Status: offline
midiman
Forum User
Newbie
Registered: 05/26/04
Posts: 4
Hello again, machinari
I've found a small bug that's only noticeable if you have set error_reporting(E_ALL)
File: admin/plugins/inmemoriam/index.php
When you call functions inm_scan1, inm_scan2, inm_scan3 and inm_scan4, you pass $T as reference
. This generates 4 warnings like "Call-time pass-by-reference" is deprecated.
You can simply remove "&" in function calls
, as you have already defined the references in functions definition
.
Hope this helps
midiman
I've found a small bug that's only noticeable if you have set error_reporting(E_ALL)
File: admin/plugins/inmemoriam/index.php
When you call functions inm_scan1, inm_scan2, inm_scan3 and inm_scan4, you pass $T as reference
Text Formatted Code
inm_scan1($valid,&$T);You can simply remove "&" in function calls
Text Formatted Code
inm_scan1($valid,$T);Text Formatted Code
function inm_scan1($valid,&$T){}Hope this helps
midiman
43
47
Quote
mach
Anonymous
Spain Rocks!
46
39
Quote
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
just fixed an autotag bug: if no text was supplied for the link, none was applied by default, which left a blank link--not clickable. fixed.
btw, all these fixes, and a ton of other fixes and additions (that will surely cause some more bugs) will be included in the next release. The next release won't happen until I can get at least another image lib under control. I'm working on NetPBM atm. I cant say how long cuz school is in so my spare time is thinned out.
btw, all these fixes, and a ton of other fixes and additions (that will surely cause some more bugs) will be included in the next release. The next release won't happen until I can get at least another image lib under control. I'm working on NetPBM atm. I cant say how long cuz school is in so my spare time is thinned out.
43
40
Quote
MrKnisely
Anonymous
I'm attempting to generate static thumbs, it got lots of drive space, but little processor and ram. Well, I click on the buton and it times out even with your 100 image safeguard in place.
The issue is that I have LARGE pictures, they're 2-3 MB each.
I must say that I'm nowhere near qualified to make head nor tail of code. (If you're running a multi-area OSPF environment, or even IS-IS, I'm your man...)
Can anyone help me with this?
Thanks!
MrKnisely
The issue is that I have LARGE pictures, they're 2-3 MB each.
I must say that I'm nowhere near qualified to make head nor tail of code. (If you're running a multi-area OSPF environment, or even IS-IS, I'm your man...)
Can anyone help me with this?
Thanks!
MrKnisely
41
49
Quote
Status: Banned
machinari
Forum User
Full Member
Registered: 03/22/04
Posts: 1512
to beat the server timeout, you have two choices...
*Increase the max_execution_time using ini_set() if you have safe mode off
*or reduce the number of images that are being processed.
to reduce the number of images that are being processed per run, do this:
find the function inm_generateStatic() in admin/index.php.
then find the following lines near the end of the function (line 882ish):
break 2;
}
if ($i >= 200){
break 2;
}
change the 300 to 99 (33 images made into 99 thumbs) and change the 200 to 100 (100 scaled images) depending on which is giving you the trouble. mess around with the numbers. subsequent runs will pick up where the last left off.
hmm.. you could probably put set_time_limit(n) into the beginning of the function and that would add n seconds to the allowable time the script has to run.. I've never done that though. Maybe I should, let me know how it goes.
keep in mind, though static images no longer have to be resized, they still have to be read into the page, so it still isn't going to be as fast as if the images were static and simply linked to in a public dir. That is one of the fallbacks of this script (for those concerned with speed over security).
*Increase the max_execution_time using ini_set() if you have safe mode off
*or reduce the number of images that are being processed.
to reduce the number of images that are being processed per run, do this:
find the function inm_generateStatic() in admin/index.php.
then find the following lines near the end of the function (line 882ish):
Text Formatted Code
if ($t >= 300){break 2;
}
if ($i >= 200){
break 2;
}
hmm.. you could probably put set_time_limit(n) into the beginning of the function and that would add n seconds to the allowable time the script has to run.. I've never done that though. Maybe I should, let me know how it goes.
keep in mind, though static images no longer have to be resized, they still have to be read into the page, so it still isn't going to be as fast as if the images were static and simply linked to in a public dir. That is one of the fallbacks of this script (for those concerned with speed over security).
42
37
Quote
Rob
Anonymous
I seem to be having the same issue as trinity and dustin. For a recap: Images do not load, error message on attempt to view full image, pear=false, paths are correct, using version 1.3.11 (note not sr1)
I'm going to attempt to upgrade to sr1 to see if that fixes the issue.
-Rob
I'm going to attempt to upgrade to sr1 to see if that fixes the issue.
-Rob
41
45
Quote
Rob
Anonymous
I've upgraded to sr1, did not fix the issue. FYI I'm running on windows 2000, apache 2, and php5. Think that might have anything to do with it?
-Rob
-Rob
37
44
Quote
Page navigation
All times are EST. The time is now 06:29 pm.
- Normal Topic
- Sticky Topic
- Locked Topic
- New Post
- Sticky Topic W/ New Post
- Locked Topic W/ New Post
- View Anonymous Posts
- Able to post
- Filtered HTML Allowed
- Censored Content