Hakan Törehan

Anonymous
I'll add that to my list. thanks.

Status: offline

KellyK

Forum User
Newbie
Registered: 07/12/05
Posts: 8
Yes actually i noticed a lot of the stuff as I was playing with the plugin. my bad for not reading everything first.

i adjusted my list above already. I will keep looking and see what else i have missed.

As for the video, yes i meant streaming.

And for the slideshow it would be nice as a user preference.

thanks again. killer plugin.


Status: Banned

machinari

Forum User
Full Member
Registered: 22/03/04
Posts: 1512
Kelly, you need to take a quick look around the software and the usage doc. many of your features and/or issues are taken care of by just reading the doc including your video file extension, comment and rating functions, default sort, splash screen, album thumbnail, and some others.

voting isn't allowed for your own media. quick change in the code is all it would take to change this if you like.
The comment engine is disabled by default--look for it in the album editor.

the slideshow template file is easily editable however you like. image details can be removed from the template file if you like, etc.
I don't like the java slideshow

etc., etc.

using a particular image/frame for a video thumb is on my list

as far as using a plugin to play video/audio or downloading to play, I went with the latter because of my personal preference and also my unwillingness to download a 30 meg plugin just so I can use quicktime in my browser to watch a 2 meg file. You have to download it anyway whether it plays in the browser or not. I would stream it if I knew everybody's server was setup the same way.

Status: offline

KellyK

Forum User
Newbie
Registered: 07/12/05
Posts: 8
Quote by machinari:
in your public_html/admin/plugins/inmemoriam/index.php find every instance of "in_array" and replace with "array_key_exists" .. no need to make any other changes.


That worked for me. Yipee!!

I did notice a few other things;

1. it recongnizes .mpeg but not .mpg, i had to rename all my files to .mpeg.

2. When i push play for a video it forces me to download rather than play in the browser or in a browser popup. --- this would be a nice User preference where the user can choose popup,same window, or download. (this only happens for wmv, other wise my quicktime plays it in the browser, but its not HTML based)

3. When i play the slideshow i completly loose the geeklog layout. it becomes a plain grey background with no layout components at all. And i have to press back many times to get to the original screen or click on the image.

4. As admin i can not vote or leave a comment. As a "logged-in user" i can vote but i still can not see the post comment section.

5. I created a members uploads which works fine, but the watermarking only allows me to seclet "default watermark"


Feature Requests;

1. Ability to assign specific thumbnails for videos

2. Jave Slideshow like in Media gallery --- Nice user preference again

3. Ability to turn on/off displying picture details under the thumbnails & images

4. Ability to allow users to only vote once per image

5. Ability to sort by filename

6. Ability to set to disable right click save image.

7. Ability to set watermark permissions for members adding media

8. Ability to make all member submitted files have a default watermark.




I cant think of anymore and i am sure some of these have probably been asked for before.


I must say this is the absolute best plug-in..

THANKS SO MUCH!!!

Status: Banned

machinari

Forum User
Full Member
Registered: 22/03/04
Posts: 1512
my bad, just found the problem...
when I added support for video, audio, etc. I neglected to complete my changes in the ftp functions..

in your public_html/admin/plugins/inmemoriam/index.php find every instance of "in_array" and replace with "array_key_exists" .. no need to make any other changes.

that's it. works now. In a few hours I'll put up a fixed file at summitpages.ca.

Status: offline

trinity

Forum User
Regular Poster
Registered: 30/01/05
Posts: 80
i am haveing the same issue with 1.0. i havent upgraded to 1.0.1 yet


Wednesday, December 07 2005 @ 12:23 PM EST
Media must conform to those media types that are defined in Inmemoriam's config.php--perhaps that is the issue.

try these steps...
- create an album via the album editor
- note the ID (that will be your folder name)
- find that folder on the server and add your media via FTP
- ensure perms reflect 777 for all items you've created via FTP
- run your scan.

do not create an album twice as you've noted previously... creating an album via FTP and then an album by the same ID via the editor should be returning an error, but I neglected that potentiality in the code apparently. The error will be generated if the ID is already recorded in the database however.

Note: the scan function should be able to detect any accessible folders as well as accessible media items within those folders. That said, if your paths are ok and your perms are fine, then I have no idea why your scan is returning "0 media items found."

glFusion - Technology Fused with Style - www.gllabs.org

Status: Banned

machinari

Forum User
Full Member
Registered: 22/03/04
Posts: 1512
Media must conform to those media types that are defined in Inmemoriam's config.php--perhaps that is the issue.

try these steps...
- create an album via the album editor
- note the ID (that will be your folder name)
- find that folder on the server and add your media via FTP
- ensure perms reflect 777 for all items you've created via FTP
- run your scan.

do not create an album twice as you've noted previously... creating an album via FTP and then an album by the same ID via the editor should be returning an error, but I neglected that potentiality in the code apparently. The error will be generated if the ID is already recorded in the database however.

Note: the scan function should be able to detect any accessible folders as well as accessible media items within those folders. That said, if your paths are ok and your perms are fine, then I have no idea why your scan is returning "0 media items found."

Status: offline

KellyK

Forum User
Newbie
Registered: 07/12/05
Posts: 8
I have set all the permissions to 777 for albums and everything below.

This should be the widest permissions set possible.

Still not working.

It simply says 0 media found.

Am i missing something simple here?


Status: offline

KellyK

Forum User
Newbie
Registered: 07/12/05
Posts: 8

You should not add any images to the albums/ directory itself as this is just an organizing container for all created albums. Your usage document should make this clear.


Correct I am putting it into the albums/album_id/ folder not the albums directory


Beyond that, this seems to be clearly a permissions issue.
Things to consider:

First: ensure that your albums directory has its permissions set according to the install instructions.


triple checked. I can add via the web without a issue.


Second: having created a "test" album via FTP, and then creating an album using "test" as the ID should have returned an "album already exists" error due to the fact that an album's ID corresponds to its directory name on the server.


I did not receive a "album already exists" error message. and again I tried the same steps.
1. create albums/test directory
2. via web do create album with the album id of "test"
no error and I can see the album
However I can not add media to the "test" album via the web, it says "filename already exists in album's directory" but via telnet it is not there.



Third: It seems that in some cases, for reasons to boring to get into, an album directory as well as any items contained in that directory need to have permissions adjusted when that directory and/or media belonging to that directory has been created via FTP. Some servers are setup in such a way that anything accomplished via FTP is not readable via PHP and, less often, vice versa.


What are the specific permission & ownership settings. even when I change it back to nobody:nobody it doesn't work.

I did this as another test.
1. I created an album
2. I added media via the web.
3. I wrote down all the permissions for the file & directory
4. I changed the ownership of just the directory to a user that could FTP to that directory
5. I changed the group & all sub files back to the original ownership & group "nobody:nobody"
6. I scan directories.
7. 0 Media files found.
8. I attempted to add another file via "add media" worked fine.




One other unlikely possibility: ensure that your $INM_CONF['path_albums'] is equal to that path wherein you are placing your media.
this is correctly set.
$INM_CONF['path_albums'] = $_CONF['path'] . 'plugins/inmemoriam/albums/';


What should i do next?

I should tell you i am runing on;

UNIX / FreeBSD
Dedicated Server
Running WHM / cPanel


Thanks,
Kelly

Status: offline

KellyK

Forum User
Newbie
Registered: 07/12/05
Posts: 8
Quote by KellyK: Hi my install works wonderfully.

until i try to FTP files.

I can not FTP into the /albums/top_level_album directory. I am sure this is becuase the album directory is owned by nobody:nobody

so i created a directory inside /albums/ and called it "test". I then added an created and album using inmemoriam and put "test" for the album ID.

I then uploaded all my files to the /albums/test directory.

After that i did a directory scan. nothing.

So i changed all the permissions & ownerships to what the other albums are and redid a scan. nothing.

How do i FTP files up??

What should the permissions & ownership be?

Thanks,

Kelly


---- This was an email from Alford ----

You should not add any images to the albums/ directory itself as this is just an organizing container for all created albums. Your usage document should make this clear.

Beyond that, this seems to be clearly a permissions issue.
Things to consider:

First: ensure that your albums directory has its permissions set according to the install instructions.

Second: having created a "test" album via FTP, and then creating an album using "test" as the ID should have returned an "album already exists" error due to the fact that an album's ID corresponds to its directory name on the server.

Third: It seems that in some cases, for reasons to boring to get into, an album directory as well as any items contained in that directory need to have permissions adjusted when that directory and/or media belonging to that directory has been created via FTP. Some servers are setup in such a way that anything accomplished via FTP is not readable via PHP and, less often, vice versa.


One other unlikely possibility: ensure that your $INM_CONF['path_albums'] is equal to that path wherein you are placing your media.

Status: offline

KellyK

Forum User
Newbie
Registered: 07/12/05
Posts: 8
Hi my install works wonderfully.

until i try to FTP files.

I can not FTP into the /albums/top_level_album directory. I am sure this is becuase the album directory is owned by nobody:nobody

so i created a directory inside /albums/ and called it "test". I then added an created and album using inmemoriam and put "test" for the album ID.

I then uploaded all my files to the /albums/test directory.

After that i did a directory scan. nothing.

So i changed all the permissions & ownerships to what the other albums are and redid a scan. nothing.

How do i FTP files up??

What should the permissions & ownership be?

Thanks,

Kelly

Status: Banned

machinari

Forum User
Full Member
Registered: 22/03/04
Posts: 1512
Quote by trinity: ... ... ... have a default image based on type

default images per media type shipped with the archive. check your public_html/gallery_name/images/ directory for video, code and audio jpg's.

Status: offline

trinity

Forum User
Regular Poster
Registered: 30/01/05
Posts: 80
would be nice if you could set an image for non image media items and select a image from those avalable for the catagory image and if no item is set foe a media item have a default image based on type
glFusion - Technology Fused with Style - www.gllabs.org

Status: Banned

machinari

Forum User
Full Member
Registered: 22/03/04
Posts: 1512
Just so you are all informed, assuming you are still subscribed to this ridiculously long thread, both Inmemoriam 1.0.1 for GL 1.3.11, and 1.0.1 for GL 1.4 have been public for a short while and no issues have been reported to me..

See this list of features.

Status: Banned

machinari

Forum User
Full Member
Registered: 22/03/04
Posts: 1512
Quote by Robin:
I meant this bit from functions.inc
yup, I've changed all that (since v0.9.0)... People wanted to have the block look this way and that way so I just put it all into a template file, which I should have done in the first place. The title attribute is there as well.

Status: offline

Robin

Forum User
Full Member
Registered: 15/02/02
Posts: 725
Quote by machinari: what version are you using Robin?


0.9.0

I meant this bit from functions.inc
[code]$retval = '<a href="' . $INM_CONF['url_html'] . '/browse.php?mid=' . $A['mid'] . '"><img src="' . $src . '" alt="' . $alt . '" /></a>'; [/code]
Geeklog Polish Support Team

Status: Banned

machinari

Forum User
Full Member
Registered: 22/03/04
Posts: 1512
what version are you using Robin? Both the alt and title attributes are set in the cvs version of inm_getRandomMedia().

Status: offline

Robin

Forum User
Full Member
Registered: 15/02/02
Posts: 725
OK here's the thing.
Random image in the block should show the alt description of an image, that is currently it's title. And this works under IE and in Firefox 1.0.7 it doesn't.
You need to add
[code]title="' . $alt . '" [/code]
to the function inm_getRandomMedia, located in functions.inc
Geeklog Polish Support Team

Status: offline

Bloggins

Forum User
Newbie
Registered: 13/08/05
Posts: 11
Quote by machinari:
Quote by Bloggins:I ran dos2unix on image-functions.inc after discovering it was dos file while about to add fix suggested to it

works like a charm now
so what was the issue? the file format or the lack of that particular bit of code?



Sorry, I never entered the fix, only dos2unix

Status: Banned

machinari

Forum User
Full Member
Registered: 22/03/04
Posts: 1512
Quote by Bloggins:I ran dos2unix on image-functions.inc after discovering it was dos file while about to add fix suggested to it

works like a charm now
so what was the issue? the file format or the lack of that particular bit of code?

Page navigation