Posted on: 03/10/05 07:28am
By: RichardTowler
I have just installed geeklog, which i have to say is the best I have tried, and I've tried alot, hehe, but in the end I went with geeklog, but I have a few questions.
I would like to have banners on the website, I thought about adding them via 'static' pages, but when i go to add 'all pages' it only adds it to the 'main' pages, like home/sections, but it doesn't add it to the actual content pages, like news..
Another Question, is it possible to have news catargories? without just having 5 different news sections for example, to add to this, is there an article mod? as I would like to have news, but also articles, of course i could use the news just to add articles in a different section, but I would prefer to have this seperate.
Thats it for now, sorry for the noob questions, don't be hard on me
New to Geeklog, Some 'Noob' Questions
Posted on: 03/10/05 09:30am
By: vinny
[QUOTE BY= RichardTowler]
I would like to have banners on the website, I thought about adding them via 'static' pages, but when i go to add 'all pages' it only adds it to the 'main' pages, like home/sections, but it doesn't add it to the actual content pages, like news..
[/QUOTE]
You're best bet to make a banner appear on every page at the top of the content area is to add the link the very end of header.thtml (in the professional theme, where is says "START OF CONTENT AREA"). While not a banner, the "Welcome to Geeklog" message at the top of all content areas of this site is similar to what you want to do (if I understand correctly what your asking for).
-Vinny
New to Geeklog, Some 'Noob' Questions
Posted on: 03/10/05 01:59pm
By: Dirk
[QUOTE BY= RichardTowler] Another Question, is it possible to have news catargories? without just having 5 different news sections for example, to add to this, is there an article mod? as I would like to have news, but also articles, of course i could use the news just to add articles in a different section, but I would prefer to have this seperate.[/QUOTE]
Is this about sub categories? Sorry, but I didn't understand it ...
bye, Dirk
New to Geeklog, Some 'Noob' Questions
Posted on: 03/10/05 05:14pm
By: Anonymous (RichardTowler)
thanks, first one worked, now have working banners on all pages. Basically my site is about gaming, and I used to have it like
XBOX
News - Using News Template
Previews - Article Template
Reviews - Article Template
but they'd all be in one section, for example
NEWS would have catergories
XBOX
PS2
GC
etc
at the moment, I'd have to have
5 different topics, but I'd really just like 1 topic, but with xxx amount of catergories.
New to Geeklog, Some 'Noob' Questions
Posted on: 03/10/05 05:39pm
By: ScurvyDawg
I think to do that you'd need either Toms Menu plugin or Blaines glMenu plugin either would allow you to setup multiple catagories and then make them appear as if they were all sub to the main category
I hope that helps
New to Geeklog, Some 'Noob' Questions
Posted on: 03/10/05 06:39pm
By: Anonymous (RichardTowler)
thanks again, one final question
when i submit a story, and i try to edit it and press save, it says error, story id already exsists...
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 01:53am
By: Dirk
[QUOTE BY= RichardTowler] when i submit a story, and i try to edit it and press save, it says error, story id already exsists...[/QUOTE]
Is this with the Professional theme? If not, see
The ID you chose for this story is already in use.[*1]
bye, Dirk
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 01:17pm
By: Anonymous (RichardTowler)
thats it, thanks again for the help.
at the moment, i'm trying to get images to work properly, having one issue
the following code
<a href="http://www.gamefaction.com/image/?url=/images/articles/[image5] ">[image2]
the image2 part is processed, but the image5 section isn'
any advice?
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 01:39pm
By: Anonymous (Richard)
doh know what it is, its putting image5 in image tags, but is there anywhere round this so it just puts in xxx.jpg rather than
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 01:43pm
By: Anonymous (RichardTowler)
whoops that didn't work right
when the [image1] is processed it puts in the full image tags to display an image, but what i would like is for it just to put the name of the file in.
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 02:45pm
By: Dirk
Why should Geeklog not put in the full URL for the image?
If you want more control, you could add the img tag to the list of allowed HTML, but then you would have to upload the images yourself.
bye, Dirk
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 03:30pm
By: Anonymous (RichardTowler)
I would prefer geeklog to create a thumb and link to it itsself in the story, from looking at the code, it seems it can do that? but I can't see anywhere in enable it...
for example, when i upload an image, 640x480, I'd need a thumbnail 145x109, and for the thumbnail to link to the 640x480 image...I have my own image viewer, but I would prefer a geeklog template viewer, but thats not important at the moment, whats important is to get the the link between thumb and full image working...
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 03:35pm
By: Dirk
I assume you're looking for this:
// When set to 1, Geeklog will keep the original, unscaled images and make
// the smaller image link to the unscaled image.
$_CONF['keep_unscaled_image'] = 0; // 1 = keep original images
bye, Dirk
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 04:20pm
By: Anonymous (RichardTowler)
unfortuatly I don't have any of those things needed for that to run
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 04:28pm
By: Dirk
Try installing
NetPBM[*2] in a subdirectory on your site (outside of the document tree of course). Where "installing" simply means picking the correct version for the operating system of your server and unpacking it in a subdirectory.
bye, Dirk
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 05:59pm
By: Anonymous (RichardTowler)
I got it to over right the max file size, but it does no resizing or thumb link etc unfortuatly
the only way I could see it to work I think, is in admin/story.php
there is a section that changes the [image1] to full html image code, and there is a $norm $left $right, would it be possible to change the $left line, so it just displays the name of the image itsself, rather than converting it to html image code?
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 06:11pm
By: Dirk
[QUOTE BY= RichardTowler] I got it to over right the max file size, but it does no resizing or thumb link etc unfortuatly[/QUOTE]
So what did it do instead? Are you sure you've set up Geeklog correctly to use NetPBM?
[QUOTE BY= RichardTowler] would it be possible to change the $left line, so it just displays the name of the image itsself, rather than converting it to html image code?[/QUOTE]
A lot is possible but you're pretty much on your own here. And you would have to make those changes again when a new version of Geeklog comes out ...
bye, Dirk
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 06:38pm
By: Anonymous (RichardTowler)
all the error I get is
Image, 20050216-t004_780.jpg had trouble being resized:
New to Geeklog, Some 'Noob' Questions
Posted on: 03/11/05 06:51pm
By: Anonymous (RichardTowler)
update, I have got it working, thanks alot for your help, appreciate it, and thanks for putting up with me
New to Geeklog, Some 'Noob' Questions
Posted on: 03/17/05 08:15pm
By: Anonymous (RichardTowler)
http://www.gamefaction.com/article.php?story=20050317123819473
things are progressing, but one final question, now that i have the image resize link working, is there a way to change the URL it gives to the image, for example I want to use an image viewer
gamefaction.com/image/?url= (imageurl)
New to Geeklog, Some 'Noob' Questions
Posted on: 03/18/05 10:14am
By: Dirk
[QUOTE BY= RichardTowler] now that i have the image resize link working, is there a way to change the URL it gives to the image, for example I want to use an image viewer
gamefaction.com/image/?url= (imageurl)[/QUOTE]
You can either use Geeklog's image upload or something else - you can't mix'n'match ...
bye, Dirk
New to Geeklog, Some 'Noob' Questions
Posted on: 03/18/05 11:00am
By: Anonymous (RichardTowler)
of course i would still use geeklog's image upload, but I would like to edit the URL it creates when linking to images if that is possible.
for example
http://www.gamefaction.com/image/?url=http://www.gamefaction.com/images/articles/20050317123819473_1_original.jpg
instead of just
http://www.gamefaction.com/images/articles/20050317123819473_1_original.jpg
New to Geeklog, Some 'Noob' Questions
Posted on: 03/18/05 11:04am
By: Dirk
Yes, I understood what you're after. And I'm telling you that's not possible. Unless you hack Geeklog, of course.
bye, Dirk